eMMC CID : 150100303030303030562012063058CF
eMMC CSD : 902701320F5903FFF6DBFFEF8A404023
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 05/2005 Rev.0x56
eMMC NAME: 000000 , S/N: 538052144
eMMC NAME (HEX): 303030303030
EMMC ROM1 (Main User Data) Capacity: 8192 MB
EMMC ROM2 (Boot Раздел 1) Емкость: 512 kB
EMMC ROM3 (Boot Раздел 2) Емкость: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC RPMB is not yet programmed (clear) or RPMB Authentication key not yet programmed
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00024000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: 000000_ 538052144_20210307_2250.extcsd
Partition info not found
Сделано.

Running:SAMSUNG: eMMC firmware update...
Init OK...
Confirmed eMMC Part Number: KLMAG2GEAC-B002
Checking security ...
Z3X EasyJtag Software ver. 3.7.0.20

Skip loading eMMC Addon Firmware
Box S/N: C0EC31E968A1BAE3, ,FW Ver.: 02.53
Напряжение подтяжки линии CMD :2148 mV
Напряжение активной линии CMD :2338 mV
Box IO Level:2800 mV
CLK Rate:14000 kHz
Using firmware file : C:\Program Files\Z3X\EASYJTAG\eMMC Firmware\KLMAG2GEAC-B002.bin
Firmware EP Offset:00040000
Update Firmware ID Hash:CB27023CDC81C8E8BB93C62E6D9836A6
Setup firmware update mode, wait 2..30 sec...
Can't setup firmware normal update mode, Reason: CARD Ready Timeout Error
Сделано.