New JAF ver 1.84 beta3

--------------------------------------------------------------------------------

29-09-2005

JAF ver 1.84 beta3 ready.

- added mm format partition. this fix the mmopen problem on 7280 and 6230i
- fixed reset phone after flash. Now you can flash cnt or ppm even after flashing mcu the phone is still dead. This will help with reported problems on 3220 and 6020.

http://files.odeon.cn/JAF184beta3.rar

JAF

30-09-2005

- modified patch for RH-19. now supports mcuid 0x2142

New JAF ver 1.84 beta4:

- added beeps after flash
- fixed bug with logfile when file is missing and option is enabled
- added mcuid skip option in dct4 flash. This option will permit to flash a file even jaf reports that is not supported. Read the warning before.
- fixed RUN INI bug. Files reported in settings file are missing causing JAF to crash.
- added MM format flag. This will solve formating twice causing erasing of gallery in 7280, 6230i etc.
- added busy state when wait for phone to boot.


http://files.odeon.cn/JAF184beta4.rar
http://files.odeon.cn/imeipatch

JAF

03-10-2005

New JAF ver 1.84 beta6


Hi

New JAF version is ready.

- added new communication server. All old version are obsolete. You must update to this version for future updates.


http://files.odeon.cn/JAF184beta6.rar


JAF

------
Last edited by J.A.F. : Today at 22:55:11. Reason: new link for beta

Решил я тут обновить свой бокс новой прошивой.. Установил прогу JAF ver 1.84 beta6.
Обновление началось...
# TO UPDATE YOU MUST USE JAF 1.84 beta6 http://files.odeon.cn/JAF184beta6.rar
Waiting for box to boot...
Box is not in app mode... Please contact your reseller!!!
всё.. бокс помер..
при запуске теперь выдаёт
BOX Error: A -> remove the box and plug it again!
After this restart ther software.
Спрашивается, нахера надо такая головня боль с такими обновлениями? 120 у.е. теперь коту под хвост!!

Всегда есть доля риска при апдейте, мрут же не только джафы, а и гриффины, и мульти-боксы, и смарт-клипы у людей. И плохая связь и сбои часто тому причина.

Я, поэтому, по мере возможности, стараюсь выполнять такие процедуры поздно ночью, когда и сервер, с которого делается апдейт, обычно менее загружен, и канал, которым я пользуюсь, тоже меньше забит. Ко всему прочему, ночью на линиях передачи всегда меньше индустриальных наводок и шумов.



Теперь важный вопрос: ты перед установкой этого экзешника какой версии полный комплект устанавливал? Если это был не релиз JAFSetup_v183.exe, то я не удивлён такими последствиями.

Кроме того, перед установкой полного комплекта новой версии, следует снести всё, что там было установлено ранее!

И на момент апдейта я традиционно глушу файерволл и антивири.

Ром еще 1 джаф прибил?

New JAF ver 1.84 beta7

--------------------------------------------------------------------------------

11-10-2005

JAF ver 1.84 beta7 is ready.


- modified support logon. You must register the box before accessing support. This limits the posibility of using a not sold box to access support area.
- fixed bug with flash id 0x000000 in dct3. now stoping the flash procedure.
- fixed bug in BT flash for DCT4. Now no more problems with 8910i BT and other phones
- improved unlock for DCT4. Phones like 1600, 1110 and 1101 are supported for lock/unlock. If you have more problems unlocking this phones please report.
- NAI file is handled corectly when flashing.
- LOCAL mode improved for DCT4 and BB5 fbus mode.
- improved CNT pack extraction. This solve the 7260 problem with stoping at cnt.
- erasing flash improved for DCT4 when flash.


Setup available here:

http://files.odeon.cn/JAF_Main_Softw..._v184beta7.exe


Regards
ODEON TEAM

Hi all

New JAF ver 1.84 final

--------------------------------------------------------------------------------

12-10-2005


Setup for JAF 1.84 final is ready.

- added restart in testmode after flash finished. This will make flashing few seconds faster.


http://files.odeon.cn/JAF_Main_Softw..._v184final.exe

17-10-2005

Our team present new software in jaf suite.
A unlock code calculator for :
Panasonic: A10x, CL50, G5x/G70, GD55, ST55, X300
NEC: 342, e101
Philips: 568
All codes old and new supported.
http://files.odeon.cn/JAF_Main_Softw...ger12beta2.rar
To avoid reselling codes only 20 codes are allowed in 60 days. So after 60 days another 20 credits will be added.
This is a free service for original JAF box owners. If you don't like it just don't use it.
This service is without support. If you don't like this then don't use it.
You do not need any cable, any activation, all you need is download the software, connect your JAF box and calculate codes.

It's a beta, if you find bugs, please post it.


Regards
ODEON TEAM

New JAF Logger ver 1.3

--------------------------------------------------------------------------------

18-10-2005

New JAF Logger is available.

New improvements are made in showing codes. Only ones which are need it.
Also some corections in CL50 codes.

http://files.odeon.cn/JAF_Main_Software/JAFLogger13.rar

Older versions are obsolete. You need this version to access the server.


Regards
JAF

New JAF ver 1.85

http://files.odeon.cn/JAF_Main_Softw...Setup_v185.exe

New JAF firmware version 1.9B is out

--------------------------------------------------------------------------------

Hi

New firmware is out to correct some problems with 6230i and 7280. Please update.
If you see the "Box have a superior firmware version. Software may not be compatible! Check for new software release." message DON'T PANIC. IT'S NORMAL


In next days new version of software will be released and all will be ok.




JAF

[ADDED=shirokov]1130628548[/ADDED]
JAF 1.85 setup

--------------------------------------------------------------------------------

We have today new updates for JAF.

1. New flash chip problem solved. Now you can flash the CNT to any of the 3220, 7260, 6020 etc without any problems.

2. CDMA support is started with this version. First we add NFP load. You can load directly NFP pack and JAF will auto select the files inside (nep, llp and cnt). ESN reading instead of imei is also added. We will extend the support of cdma soon as i get more familiar with this phones

3. DCT4 asic 3 is added for unlock, for phones like 8800.

4. Improved after flash for wd2 phones. i hope this will solve MCU Ver failed.

5. DCT4 content pack extraction have more info in process.

6. BB5 fbus mode is selected default.

7. Easy flash cable support is added. If you have this cable check the box in software.

8. Speed of flash writing is improved by almoust 80% on some phones (dct4 and bb5) so you can test and see the difference

9. new loaders supported and available in this setup.

10. Jaf logger was added in setup.

11. small bugs were solved

If you have some problems please post them in forum.
Thanks goes to melakamobile for the flash file 128k paged, it was saved me some time of working also to livewirecebu for sending the 3220 phone to test. For CDMA support and suggestions, thanks go to Jan and Alif. For easy flash support thanks to Catik.

Download here: http://files.odeon.cn/JAF_Main_Softw...Setup_v185.exe

Regards
ODEON TEAM

--------------------------------------------------------------------------------
Last edited by Raskal : Yesterday at 04:40.

что-то с новым апдейтом не меняется имей(((

What is it?!

Study our Rules please!

да, не работает, как всегда начнут в день по несколько апдейтов делать - убирать баги.. Так что не надо спешить делать апдейты..

Поставил 1.85
Box have old firmware version, please update firmware!
Software disabled!

Пробую обновить firmware:
Update Started...
#Server Ready...
Latest version on server is: 019C
Receiving update, please wait...
Server Error 10

В чем может быть дело?

В принципе, иногда такое явление имеет место - возможно, это врЕменная проблема у них на сервере. Возможно, связанная со слишком большим количеством пользователей, одновременно подключившихся и желающих проапдейтить свои боксы. Следует пробовать логиниться время от времени.

Только что проверил, кстати, - работает всё, и вот лог апдейта:

----------------------------------------------------------------------
Box have a superior firmware version. Software may not be compatible! Check for new software release.
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
Update Started...
#Server Ready...
Latest version on server is: 019C
Receiving update, please wait...
!EXITING!

Up****** Box...
Waiting for box to boot...
#Server Ready...
!EXITING!

Done!

--------------------------------------------------------------------------------



А вот комментарий разработчиков по поводу очередной версии фирмваре:


New JAF firmware 1.9C, please update

--------------------------------------------------------------------------------

Hi

New FW available. It corrects some problems with flashing error cmd14, and error cmd 20. Also improved mmc reset.


JAF

New JAF setup 1.86 ready...

--------------------------------------------------------------------------------

Hi

New JAF setup version 1.86 is ready to download.

Most of news are bug fixing and improving.
-more speed and stability in flashing
-improved mmc reset
-reading imei
-after flash 6600 mcu ver reading.
-DDDD in patch imei
and many others.

http://files.odeon.cn/JAF_Main_Softw...Setup_v186.exe



JAF

я се-то недогнал про ридинг имей в последнем апдейте