Re: N96, Rm-247: после русификации при включении белый дисплей
#21
В продолжении темы: попался еще один такой итальянец, продуктовый код 0572896, по инфе с нокии, Италия
И как раз присутствует в этом пакете Nokia_firmware_RM-247_EMEA_FOR_ITALY_21.003_v6.0 его продуктовый код.
Пролил фениксом прошивку с таким продуктовым кодом 0567006: RUSSIA/BELARUS - Black. версию 30.033, после прошивки и сбросов аппарат включился с белым дисплеем, передернул АКБ и тел включился с русским. Камера работает, беглый осмотр каких-то серьезных проблем не выявил.
Прошивка стояла в аппарате 11.101
Лог прошивки через phoenix:
Код:
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Verifying communication to device...
Getting product info...
Scanning image files...
Loading secondary boot code: 39104 bytes
Secondary boot loaded
Loading update server code: 351985 bytes
Update server loaded
Loading slave secondary boot code: 15168 bytes
Slave secondary boot code loaded
Loading slave update server code: 525892 bytes
Slave update server loaded
Partitioning....
Partitioning complete
Erasing....
Erasing complete
Asic CMT: Start programming 6310 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic APE: Start programming 129427 KB...
Asic APE: Programming data sent: 0%
Asic APE: Programming data sent: 10%
Asic APE: Programming data sent: 20%
Asic APE: Programming data sent: 30%
Asic APE: Programming data sent: 40%
Asic APE: Programming data sent: 50%
Asic APE: Programming data sent: 60%
Asic APE: Programming data sent: 70%
Asic APE: Programming data sent: 80%
Asic APE: Programming data sent: 90%
Asic APE: Programming data sent: 100%
Asic APE: Programming data sent: 100%
Asic APE: Programming data sent: 100%
Programming complete
Asic CMT: programming succeeded
Asic APE: programming succeeded
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Phone flashing completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified
Product code changed
Started product mode change
Product mode change complete
Doing factorysets
Factorysets complete
Loading default data to phone
Loading default data to phone
Getting Data Package
Reading product state
Starting backup/restore sub-procedure: mode change post delay
mode change post delay
mode change post delay
Sub-procedure completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ProductProfile, version: 1.1
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Backup/restore result: 0 out of 1 items were not backed up
Default data loading complete
Stopping all operations, returning phone to default mode
All operations completed
Product flashing succeeded.
Последние файлы
