Selected pinout: GEN2 High Speed Pinout
Change EasyJTAG Pinout OK
Z3X EasyJtag Box JTAG Софт версия. 2.9.0.1
Loading eMMC GEN2 Firmware... IO: 2800 mV
Initial pull results:
clock: 1660mV pin connected ok
command: 1667mV pin connected ok
data0: 1671mV pin connected ok
data1: 1668mV pin connected ok
data2: 1669mV pin connected ok
data3: 1668mV pin connected ok
data4: 1668mV pin connected ok
data5: 1668mV pin connected ok
data6: 1668mV pin connected ok
data7: 1668mV pin connected ok
Box S/N: 8B9BXXXXXXXXXXXX, ,FW Ver.: 02.21
Box IO Level:2800 mV
CLK Rate:21000 kHz
Bus Width:8bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 15010041574D42335201F7A0C044C1AD
EMMC CSD : D02701320F5903FFF6DBFFEF92404009
Изготовитель eMMC: ID: 0015 , OEM ID: 0100
EMMC Date: 12/2014 Rev.0x1
EMMC NAME: AWMB3R , S/N: 4154507332
EMMC NAME (HEX): 41574D42335200
EMMC ROM1 (Main User Data) Capacity: 14910 MB
EMMC ROM2 (Boot Раздел 1) Емкость: 4096 kB
EMMC ROM3 (Boot Раздел 2) Емкость: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
[свернуть]