GUI v0.91380037

- by mistake, phone repowered during complete, fixed.
- profiles now saves settings separate for every model in every window.
- some other ll test improvements...

GUI v0.91380038

- nested directory creation during package restore was broken, fixed.

Наконец-то! Решили проблему с созданием директорий.
Это очень радует!

Комментирую, по проьбам коллег.
В предыдущих версиях оболочки был отмечен баг, который при вливании в тело cust пакета вызывал ошибки, связанные с невовозможностью создания папок в служебных разделах ПО, типа tpa\preset\custom.
Этот баг, в дальнейшем, не давал возможности конечным пользователям пользоваться услугами обновления с оффициального сайта SE.

it has been found, that all sibley-based phones has slightly different gdfs sizes, so all gdfs_in_ssw_format for k310,k510,z530,z550,w300,w810 was broken, and using them COULD bring errors when complete
( "starting gdfs:error 5" ) and when unlocking ( "error while setting up gdfs")

corrected gdfs files attached, software at support area updated.

pwd "fuckzulea"

a little reminder how to use gdfs_in_ssw_format for dead phone restoration (erom must be ok for it)

settings:
check ONLY complete phone, unlock after flash
semc tab:
add files: xxx_gdfs_in_ssw_format+main+fsimage
press flash
phone must be flashed, unlocked and completed


ps.
CORRECT gdfs sizes for k310,k510,z530,z550,w300,w810

start 47e00000
len 200000

i need k310 gdfs in ssw format for complete set.

sibley_correct_gdfs.rar

Вниманию украинских специалистов!
На Украину зашла партия терминалов W300 серитифицированных UA/UCRF, но без языков ВООБЩЕ. Только English. !!!!!!!
Версия 9A036. На саппорте Setool выложили полный пакет. Не забывайте, что по новой спецификации наш языковой пакет c_asia. И не забывайте вливать соответствующий региону custpack, иначе получите 1EOW в GDFS и клиент не сможет обновляться через Инет.

GUI v0.91380039

- SEMCsec released EROM updater for db2020.
it can help with red blink and "gdfs startup error:29" on db2020 phones.
it can't help to repair damaged security units.
it only works on com/ufs cables.

how to use - settings, set USE SERVER.
semc tab - select phone model
press recovery.

erom must be upgraded and possible your problem solved.

- some fixes in com cables and db2020 booting
- card unblocking not works as intended, fixed.

Это хорошая новость! Несколько смущает непределенность, что "это, возможно, решит Ваши проблемы"... А может и не решить...
Ну мы надеемся, что один из светлейших умов GSM индустрии the_laser не оставит нас никогда!

FAQ к GUI v0.91380039

q: what is "erom upgrade" for db2020 phones (k610/v630/k790/k800/w850) and how to use it?

a:
semc gone crazy with security in db2020 phones, so if anything secure damaged (as they thinks) - EROM not starts phone and phone is completely dead.

in early EROM releases (R3A011 versions) SEMCsec developer done some error,because of that EROM sometimes can't setup GDFS good.

we will see it as RED BLINK during phone power on. and as "gdfs startup error:29" when we trying to flash it.

SEMCsec released then EROM updater, which is upgrade known EROM to new version. that new version solves red blink error (of course, if security units intact). i decided that it is not fair to keep that loader only for emma, so it is embedded in setool2 from now on.

usage is very simple.
select correct db2020 model.
check "use server" in settings (credits will NOT be deducted)
connect phone to COM/UFS cable (USB will NOT work)
press RECOVERY

EROM will be upgraded and your problems CAN be solved.

sadly, SEMCsec not released anything to correct problem, when security units or gdfs totally damaged. they fear of illegal usage
ps.
Если с телефоном такие проблемы как мигания красного светодиода или ошибка "gdfs startup error:29" то надо записать новым EROM
Выбрать модель.
Подключить телефон через COM/UFS кабель.
Поставить галочку на "use server"(лог удерживается не будет).
Нажать кнопочку RECOVERY.

GUI v0.91380040

- protector update, now setool2 must co-exist with KAV
- it has been found, that in Z530 EROM not HW protected.

Because of that,possible to revive Z530 phones with damaged erom.
How to do:

on semc tab, select z530 in model list.
press recovery.
phone will be recovered and attempt will be made to repair EROM.
most possible, you will need to reflash phone in order to get it fully working.

WARNING!!! if you select z530 and will use recovery with k310/k510/w300/w810/z550 phone - you will receive dead brick. it is only usable for current breed of Z530 phones

Это можно назвать прорывом! Восстановление EROM в sibley based! Пусть только в одном Z530 - но ведь, я надеюсь, это только начало!
Команда SeTool, воодушевленная уходом Зулика, воспрянула духом!

k800 r1ed001 firmware uploaded in support area.
w810 r4db005 firmware updated
k610 r1cb001 firmware updated.
k610 r1ed001 firmware uploaded.
k618 r1cf001 firmwares added (look in k610 section)
k61x customizations update

GUI v0.91380041

- added brown to red db2020 conversion.
how to use.
UNCHECK "USE SERVER"
first, be sure your phone is cid49. (press identify and read "flash cid:49")
if not, go to "Empty Fill" tab, select CID49, press recovery - phone will be brown cid49
next, convert phone to red.
select correct model, select correct conversion EROM
(example - phone is k610, conversion EROM is eroms\k610_erom_cnv_brown2red.cry )
press flash.
your phone is read and ready to flash using credits system.
( because of obvious reasons filesystem read not supported for brown 2020,unlocking is not supported for brown 2020,well... only flashing possible )

- profiles auto load at startup now
- misc loaders updated
- recovery procedure for z530 updated a bit.

k790 r1ed001 firmware uploaded.
k610 r1ed001 fimrware updated.

2006-09-19
Our Support area has been updated with SE firmware and customisation packs listed below:
• k790 r1ed001 firmware uploaded
• k610 r1ed001 fimrware updated
• k750 r1db001 rest files added
• j220 R5N firmware uploaded
• J230 R5N firmware uploaded
• K750 R1DB001 firmware uploaded (very few lp released by SEMC so far)
• W700 R1DB001 firmware uploaded
•
•
* Always check support area and support forum, new flashes are appearing regularly.

rest files for K510 R4EA031 firmware.
one rest file for k750 r1da001 firmware added.
K510 R4EA031 firmware uploaded
K750 R1DA001 firmware major update
Z610 R1ED001 firmware and customization files uploaded (SEMC not released all langpacks for now)
K610 IM R1ED001 firmware and customization packs uploaded

Новая Beta:GUI v0.91380042 БУТЕ ВНИМАТЕЛЬНЫ! ЭТО ТЕСТОВАЯ ВЕРСИЯ, МОЖЕТЕ УБИТЬ ТЕЛЕФОН БЕЗ ВОЗМОЖНОСТИ ВОСТАНОВЛЕНИЯ.

that is very beta, main target is support "new" flash chip in z300/j220/j230.
"new flash symptom" was "empty" codes when reading and garbled flash readout, unabilty to flash.
hopefully, all of that was fixed, but need checking. support was done blindly,so ... you have been warned.
please, try "unlock" first, and only if it works try flash.
"unlock" CAN NOT kill your phone
once again, i have no response for dead phone - THAT IS TEST version.

New feature is ".vkp" support. .vkp is patches, maded by different persons to tune your phone. those who need that patches know where to get them.
Soon i will made a .vkp request thread here and will ask some famous patchers to visit that thread.
Usage simple - put .vkp file in misc. edit and press write script.

Sibley-based (w300/w810/k310/k510/z550) emptyboards support was flawed, fixed.
as i remember - locks were incorrectly written, should be fixed.

rest.rar updated with latest restoration files.

some w850 r1ed001 firmware and custpacks uploaded
some k310 r4ea031 firmware uploaded
Z610 R1ED001 firmware updated
K610 R1ED001 firmware updated
W810 R1EA031 firmware uploaded.
Z530 R6DA001 firmware uploaded.
Z610 R1ED001 firmware updated.
SOME W710 R1EE001 firmware and custpacks uploaded
SOME Z710 R1EF001 firmware and custpacks uploaded

СВЕРШИЛОСЬ!
Скачок и прогресс! Сносим user code на DB2020!

GUI v0.91380043

- added usercode reset for db2020 phone.
requires server credits.

Затеплилась надежда и на нечто большее....

http://www.mobile-files.com/forum/sh...=17423&page=11
GUI v0.91380043

- added usercode reset for db2020 phone.
requires server credits.

how to use - two way

first way good when doing only usercode reset
- check "use server".
- select correct model
- press unlock. usercode will be resetted to 0000

second way good when flashing.

- check "use server"
- check "unlock after flash"
- check "complete phone" if you need it
- select correct model
- press flash. phone will be flashed and user code will be resetted to 0000

исправленые rest файлы
скопировать в папку rest

fix.rar

2006-11-01
Our Support area has been updated with SE firmware and customisation packs listed below:
• some K800 R1EF001,R1EJ001 firmwares uploaded
• some K790 R1EG001 firmwares and customization packs uploaded
• Z550 R6CA009 firmware uploaded
• Z710 R1EF001 firmware and customization packs major update
• W850 R1ED001 firmware and customization packs major update
• W710 R1EE001 firmware and customization packs major update
• Z610 R1ED001 firmware and customization packs major update
• some of Z610 R1EJ001 firmware uploaded
• some of Z610 R1EL001 firmware uploaded
• new rest files pack now available in our forum
* Always check support area and support forum, new flashes are appearing regularly.

Z610 R1ED001 firmware and customization packs major update
some of Z610 R1EJ001 firmware uploaded
some of Z610 R1EL001 firmware uploaded
Z525 R3K030 firmware and customization files uploaded for fun.
some unusual w810 rest files attached.pwd is "fuckstealers" as usual.
z525rest.rar
w810_1011062148.rar

W300 R4EA031 firmware uploaded (some phones will only work with it)
W300 R9A036 firmware updated
W810 R4CE012, R4CK003, R4DB005,R4EA031 firmware updated

customizations for that models updated too, still uploading....

2006-11-19

k800 r1ed001 firmware updated
k800 r1ej001 firmware updated