COM3 [VCP0] selected
module v3.99
Device: _Autodetect MT6253 NOR
Checking data, wait...
Action: read flash NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6253:8A02:8A00
status: FF
bbchip bl ver: FE
NOR flash id[0093]: 0089:890300000000 [INTEL] PF38F30xxM0x1xx
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_EXIST/00000108
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 00000000/00000000
detect sec ro...
detect custom parameters...
detect project-id...
project-id: ZX502_V1003
detect NOR info...
number of areas/bytes to read: 1:00050000
reading (HW_STORAGE_NOR)...
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: TELSDA53_09A_GEMINI_PCB01_GPRS_MT6253_S00.ZX502_V1003.BIN
project-id: ZX502_V1003, 00000000
code offset: 00000000
ffs offset/size [02]: 00E00000/00200000
rom info structure: [standard] type (07)
TCL-ID is absent
===> done
====================
New firmware found (v.3.99, database date: 04.08.2011):
TELSDA53_09A_GEMINI_PCB01_GPRS_MT6253_S00.ZX502_V1003.BIN
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support:
[email protected] or upload files to
http://rapidshare.com or
http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 16Mb
number of areas/bytes to read: 1:01000000
reading (HW_STORAGE_NOR)...
file saved: C:\InfinityBox\MModule\TELSDA53_09A_GEMINI_PCB01_GPRS_MT6253_S00.ZX502_V1003__fullflash_20110831-132015.B0M.bin
Disconnect...
done
Finished, time used: 8 min 53 sec
Remove/Install battery now !
smart-card: disconnected
[свернуть]