Последние файлы
Наши партнеры
Важная информация
Клон Iphone на базе 6235B не могу залить прошивку.
Infinity Box - Официальный русскоязычный форум поддержки продукта Infinity Box
Официальный сайт продукта www.infinity-box.com
Обновления Infinity Box
Обновления BEST
Обновления ChineseMiracle
Обновления ChineseMiracle-2
Обновления MT62xx CPU Russian Language Pack Editor
Ответ
 
Опции темы
  • Новое
    Аватар для clifford_umc

    clifford_umc
    Участник
    Действительный участник ассоциации MCRF.RU

    Сообщений:
    1,604
    Регистрация:
    25.09.2006
    Возраст:
    47
    Рейтинг мнений: 469
    Вес репутации: 335
    clifford_umc clifford_umc clifford_umc clifford_umc clifford_umc clifford_umc clifford_umc clifford_umc clifford_umc clifford_umc clifford_umc
    Очки: 36,329, Уровень: 100 Очки: 36,329, Уровень: 100 Очки: 36,329, Уровень: 100
    Активность: 99% Активность: 99% Активность: 99%
    По умолчанию Клон Iphone на базе 6235B не могу залить прошивку. #1
    Код:
    ==== [17.08.2010 15:16:51] ====
COM2 [VCP1] selected
module  v3.20
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
editor_corrected_MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09__firmware_20100817-125950.B4M.bin.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
nfi scat area detected
nfi area detection finished: Ok
"format ffs" active
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0047]: 0098:00C0008000D5 [TOSHIBA] TC58NWM9S8C
chip size: 64Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 10
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: I901MULv01.01b09
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: MOSPEC35_08B_BOOTLOADER_V005_MT6235B_I901MULV01_01B09.bin
nfi area detection finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09.BIN
project-id: I901MULv01.01b09, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: 2nd [standard] type
TCL-ID is absent
===>  done
nfi area detection...
nfi scat area detected
nfi area detection finished: Ok
startup code area #1 check...
error: done
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
write core...
error: can not write flash: 0FAF:S_FT_NFB_DOWNLOAD_CODE_FAIL
error: last error: 0FAF:S_FT_NFB_DOWNLOAD_CODE_FAIL
Disconnect...
done
Finished, time used: 5 min 46 sec
Remove/Install battery now !

==== [17.08.2010 15:26:37] ====
COM2 [VCP1] selected
module  v3.20
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
editor_corrected_MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09__firmware_20100817-125950.B4M.bin.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
nfi scat area detected
nfi area detection finished: Ok
"format ffs" active
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0047]: 0098:00C0008000D5 [TOSHIBA] TC58NWM9S8C
chip size: 64Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 10
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: I901MULv01.01b09
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: MOSPEC35_08B_BOOTLOADER_V005_MT6235B_I901MULV01_01B09.bin
warning: id-page1 area is invalid
nfi area detection finished: failed
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09.BIN
project-id: I901MULv01.01b09, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: 2nd [standard] type
TCL-ID is absent
===>  done
nfi area detection...
nfi scat area detected
nfi area detection finished: Ok
startup code area #1 check...
error: done
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
write core...
error: can not write flash: DFD5:??
error: last error: DFD5:??
Disconnect...
done
Finished, time used: 2 min 16 sec
Remove/Install battery now !

==== [17.08.2010 15:46:03] ====
COM2 [VCP1] selected
module  v3.20
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
editor_corrected_MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09__firmware_20100817-125950.B4M.bin.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
nfi scat area detected
nfi area detection finished: Ok
"format ffs" active
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0047]: 0098:00C0008000D5 [TOSHIBA] TC58NWM9S8C
chip size: 64Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 10
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: I901MULv01.01b09
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: MOSPEC35_08B_BOOTLOADER_V005_MT6235B_I901MULV01_01B09.bin
warning: id-page1 area is invalid
nfi area detection finished: failed
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09.BIN
project-id: I901MULv01.01b09, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: 2nd [standard] type
TCL-ID is absent
===>  done
nfi area detection...
nfi scat area detected
nfi area detection finished: Ok
startup code area #1 check...
error: done
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
write core...
error: can not write flash: 0FAF:S_FT_NFB_DOWNLOAD_CODE_FAIL
error: last error: 0FAF:S_FT_NFB_DOWNLOAD_CODE_FAIL
Disconnect...
done
Finished, time used: 2 min 47 sec
Remove/Install battery now !

==== [17.08.2010 15:51:26] ====
COM2 [VCP1] selected
module  v3.20
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
editor_corrected_MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09__firmware_20100817-125950.B4M.bin.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
nfi scat area detected
nfi area detection finished: Ok
"format ffs" active
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0047]: 0098:00C0008000D5 [TOSHIBA] TC58NWM9S8C
chip size: 64Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 10
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: I901MULv01.01b09
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: MOSPEC35_08B_BOOTLOADER_V005_MT6235B_I901MULV01_01B09.bin
warning: id-page1 area is invalid
nfi area detection finished: failed
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09.BIN
project-id: I901MULv01.01b09, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: 2nd [standard] type
TCL-ID is absent
===>  done
nfi area detection...
nfi scat area detected
nfi area detection finished: Ok
startup code area #1 check...
error: done
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
write core...
error: can not write flash: 0FAF:S_FT_NFB_DOWNLOAD_CODE_FAIL
error: last error: 0FAF:S_FT_NFB_DOWNLOAD_CODE_FAIL
Disconnect...
done
Finished, time used: 1 min 32 sec
Remove/Install battery now !

==== [17.08.2010 16:03:31] ====
COM2 [VCP1] selected
module  v3.20
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
editor_corrected_MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09__firmware_20100817-125950.B4M.bin.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
nfi scat area detected
nfi area detection finished: Ok
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0047]: 0098:00C0008000D5 [TOSHIBA] TC58NWM9S8C
chip size: 64Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 10
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: I901MULv01.01b09
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: MOSPEC35_08B_BOOTLOADER_V005_MT6235B_I901MULV01_01B09.bin
warning: id-page1 area is invalid
nfi area detection finished: failed
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09.BIN
project-id: I901MULv01.01b09, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: 2nd [standard] type
TCL-ID is absent
===>  done
nfi area detection...
nfi scat area detected
nfi area detection finished: Ok
startup code area #1 check...
error: done
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
write core...
error: can not write flash: FDEF:??
error: last error: FDEF:??
Disconnect...
done
Finished, time used: 3 min 20 sec
Remove/Install battery now !

==== [17.08.2010 16:09:24] ====
COM2 [VCP1] selected
module  v3.20
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
editor_corrected_MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09__firmware_20100817-125950.B4M.bin.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
nfi scat area detected
nfi area detection finished: Ok
"format ffs" active
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0047]: 0098:00C0008000D5 [TOSHIBA] TC58NWM9S8C
chip size: 64Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 10
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (460800)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: I901MULv01.01b09
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: MOSPEC35_08B_BOOTLOADER_V005_MT6235B_I901MULV01_01B09.bin
warning: id-page1 area is invalid
nfi area detection finished: failed
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09.BIN
project-id: I901MULv01.01b09, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: 2nd [standard] type
TCL-ID is absent
===>  done
nfi area detection...
nfi scat area detected
nfi area detection finished: Ok
startup code area #1 check...
error: done
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
.
.
write core...
error: can not write flash: EDF5:??
error: last error: EDF5:??
Disconnect...
done
Finished, time used: 2 min 11 sec
Remove/Install battery now !

==== [17.08.2010 16:12:22] ====
COM2 [VCP1] selected
module  v3.20
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
editor_corrected_MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09__firmware_20100817-125950.B4M.bin.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
nfi scat area detected
nfi area detection finished: Ok
"format ffs" active
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0047]: 0098:00C0008000D5 [TOSHIBA] TC58NWM9S8C
chip size: 64Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 10
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (230400)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: I901MULv01.01b09
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: MOSPEC35_08B_BOOTLOADER_V005_MT6235B_I901MULV01_01B09.bin
warning: id-page1 area is invalid
nfi area detection finished: failed
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09.BIN
project-id: I901MULv01.01b09, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: 2nd [standard] type
TCL-ID is absent
===>  done
nfi area detection...
nfi scat area detected
nfi area detection finished: Ok
startup code area #1 check...
error: done
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
.
.
.
.
.
.
write core...
error: can not write flash: 96E7:??
error: last error: 96E7:??
Disconnect...
done
Finished, time used: 3 min 26 sec
Remove/Install battery now !

==== [17.08.2010 16:39:09] ====
COM2 [VCP1] selected
module  v3.20
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
editor_corrected_MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09__firmware_20100817-125950.B4M.bin.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
nfi scat area detected
nfi area detection finished: Ok
"format ffs" active
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0047]: 0098:00C0008000D5 [TOSHIBA] TC58NWM9S8C
chip size: 64Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 10
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (115200)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: I901MULv01.01b09
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: MOSPEC35_08B_BOOTLOADER_V005_MT6235B_I901MULV01_01B09.bin
warning: id-page1 area is invalid
nfi area detection finished: failed
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09.BIN
project-id: I901MULv01.01b09, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: 2nd [standard] type
TCL-ID is absent
===>  done
nfi area detection...
nfi scat area detected
nfi area detection finished: Ok
startup code area #1 check...
error: done
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
.
.
.
.
.
.
.
write core...
error: can not write flash: 0FAF:S_FT_NFB_DOWNLOAD_CODE_FAIL
error: last error: 0FAF:S_FT_NFB_DOWNLOAD_CODE_FAIL
Disconnect...
done
Finished, time used: 4 min 25 sec
Remove/Install battery now !
    Зачитал прошивку нормально page+spare как фулл и как firmware. Отредактировал в LPE а вот залить назад не могу, причем после етой операции тело не включается. Скорости менял.
    19.08.2010, 10:58
    Ответить с цитированием
  • Новое
    Аватар для J.M.

    J.M.
    Новичок

    Сообщений:
    861
    Регистрация:
    18.10.2005
    Возраст:
    41
    Рейтинг мнений: 373
    Вес репутации: 0
    J.M. J.M. J.M. J.M. J.M. J.M. J.M. J.M. J.M. J.M. J.M.
    Очки: 28,317, Уровень: 98 Очки: 28,317, Уровень: 98 Очки: 28,317, Уровень: 98
    Активность: 20% Активность: 20% Активность: 20%
    По умолчанию Re: Клон Iphone на базе 6235B не могу залить прошивку. #2
    clifford_umc, с родным фуллом CM ведет себя так же ?
    19.08.2010, 11:40
    Ответить с цитированием
  • Новое
    Аватар для eglunas

    eglunas
    Неактивный

    Сообщений:
    780
    Регистрация:
    16.03.2009
    Возраст:
    49
    Рейтинг мнений: 480
    Вес репутации: 0
    eglunas eglunas eglunas eglunas eglunas eglunas eglunas eglunas eglunas eglunas eglunas
    Очки: 25,062, Уровень: 95 Очки: 25,062, Уровень: 95 Очки: 25,062, Уровень: 95
    Активность: 7% Активность: 7% Активность: 7%
    По умолчанию Re: Клон Iphone на базе 6235B не могу залить прошивку. #3
    Если родной фулл заливается нормально- значит редактируя где то допустили ошибку. Для выяснения где, что и как- редактируйте и заливайте прошивку постепенно, с начала шрифты, потом клавиатуру, рисунки и в конце сам перевод.
    Да, ещё, бывали случаи что при таких ошибках редактированная прошивка всё таки заливалась со 2-4 попытки...
    19.08.2010, 12:22
    Ответить с цитированием
  • Новое
    Аватар для eglunas

    eglunas
    Неактивный

    Сообщений:
    780
    Регистрация:
    16.03.2009
    Возраст:
    49
    Рейтинг мнений: 480
    Вес репутации: 0
    eglunas eglunas eglunas eglunas eglunas eglunas eglunas eglunas eglunas eglunas eglunas
    Очки: 25,062, Уровень: 95 Очки: 25,062, Уровень: 95 Очки: 25,062, Уровень: 95
    Активность: 7% Активность: 7% Активность: 7%
    По умолчанию Re: LPE при сохранении прошивки выдаёт ошибку. #4
    Вот простой пример. Прошивка L003A_MIC3_PCB01_GPRS_MT6235B_S01.L003A_MIC3_TY8A_ WIFI1_TV1_EN_SM_ML_V4_08__firmware_20100829-184118.B4M.bin
    Заменил шрифты (все новые меньше старых по обьёму), заменил языковый пакет. При прошивке получил ошибку. Стал разбиратся. Заменил в начале языкоый пакет чтоб много не мучится и заменивая шрифты по одному стал заливать прошивки. Залились все под ряд! Начал делать следущий идентичный телефон- заменил шрифты, заменил языковый пакет- ошибка.... Взял заного- заменил языковый пакет, только потом заменил шрифты- прошивка прошилась нормально....
    To s.Mobi. Выкладываю все 3 прошивки- оригинал, замена в начале яз. пакета (заливается), замена в начале шрифтов (не заливается). Заменялись испанский язык и шрифиы английского (они связанны с испанским).
    Вложение 16475
    Вложение 16476
    Вложение 16477



    MПеремещено по просьбе автора


    Здесь был вложен файл: L003A_MIC3_PCB01_GPRS_MT6235B_S01.L003A_MIC3_TY8A_ WIFI1_TV1_EN_SM_ML_V4_08__firmware_20100829-18.rar (17.71 Мб), но к сожалению был утерян. Если он у Вас есть, свяжитесь с администрацией для его восстановления. Спасибо.
    Здесь был вложен файл: language first.B4M.rar (17.16 Мб), но к сожалению был утерян. Если он у Вас есть, свяжитесь с администрацией для его восстановления. Спасибо.
    Здесь был вложен файл: fonts first.B4M.rar (17.16 Мб), но к сожалению был утерян. Если он у Вас есть, свяжитесь с администрацией для его восстановления. Спасибо.
    Последний раз редактировалось eglunas; 30.08.2010 в 10:19.
    29.08.2010, 20:39
    Ответить с цитированием
    3 пользователя(ей) добавили плюсы
    IHelper (30.08.2010), s.Mobi (29.08.2010), Turboxxx (29.08.2010)
  • Новое
    Аватар для clifford_umc

    clifford_umc
    Участник
    Действительный участник ассоциации MCRF.RU

    Сообщений:
    1,604
    Регистрация:
    25.09.2006
    Возраст:
    47
    Рейтинг мнений: 469
    Вес репутации: 335
    clifford_umc clifford_umc clifford_umc clifford_umc clifford_umc clifford_umc clifford_umc clifford_umc clifford_umc clifford_umc clifford_umc
    Очки: 36,329, Уровень: 100 Очки: 36,329, Уровень: 100 Очки: 36,329, Уровень: 100
    Активность: 99% Активность: 99% Активность: 99%
    По умолчанию Re: Клон Iphone на базе 6235B не могу залить прошивку. #5
    Код:
    COM2 [VCP0] selected
module  v3.22
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09__firmware_20100817-125950.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
converting data...
done 0x01F08000 bytes
bootloader version: MOSPEC35_08B_BOOTLOADER_V005_MT6235B_I901MULV01_01B09.bin
nfi area detection (3 cores) finished: Ok
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0047]: 0098:00C0008000D5 [TOSHIBA] TC58NWM9S8C
chip size: 64Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 10
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (230400)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: I901MULv01.01b09
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: MOSPEC35_08B_BOOTLOADER_V005_MT6235B_I901MULV01_01B09.bin
warning: id-page1 area is invalid
nfi area detection (0 cores) finished: failed
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: MOSPEC35_08B_PCB01_GPRS_MT6235B_S01.I901MULV01_01B09.BIN
project-id: I901MULv01.01b09, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: [standard] type (07)
TCL-ID is absent
===>  done
nfi area detection...
converting data...
done 0x01F08000 bytes
bootloader version: MOSPEC35_08B_BOOTLOADER_V005_MT6235B_I901MULV01_01B09.bin
nfi area detection (3 cores) finished: Ok
startup code area #1 check...
error: done
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
.
.
.
.
.
.
write core...
error: can not write flash: 0FAF:S_FT_NFB_DOWNLOAD_CODE_FAIL
error: last error: 0FAF:S_FT_NFB_DOWNLOAD_CODE_FAIL
Disconnect...
done
Finished, time used: 3 min 18 sec
Remove/Install battery now !
    Считывал фулл версией 3.20 заливал 3.22 .
    04.09.2010, 12:35
    Ответить с цитированием
Ответ

« Предыдущая тема | Следующая тема »

Здесь присутствуют: 1 (пользователей: 0 , гостей: 1)
 

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения
BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.
Быстрый переход

Похожие темы
Тема Автор Раздел Ответов Последнее сообщение
Не могу вернуть E1081TXEJA3 прошивку, после E1081TDXJC1 прошивки Turboxxx SWIFT платформа 0 28.05.2010 10:59
не могу снять код на Iphone 3GS (американец) Alva iPhone, iPod Touch 19 23.03.2010 03:06
iPhone PC Suite - v.2.7 bardar Apple 2 15.03.2010 03:42
Не могу зарусить fullflash LP-editor(ом) и залить FlashToolom Sopak92 MT62xx CPU Russian Language Pack Editor for Infinity Box 7 05.02.2010 12:51
iPhone, iPhone 3G & iPhone 3GS видео-помощник по ремонту LASDORF iPhone, iPod Touch 4 09.12.2009 18:09


Текущее время: 16:03. Часовой пояс GMT +3.