Z3X EasyJtag Software ver. 1.8.1.1
Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: хххххххххххххххх, ,FW Ver.: 01.52
CMD Pullup Level:1959 mV
CMD Active Level:2093 mV
eMMC Device Information
EMMC CID : 90014A4834473164048100A2C658CF5C
EMMC CSD : D02701320F5903FFFFFFFFE78A4040E2
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 12/2012 Rev.0x81
EMMC NAME: H4G1d , S/N: 10667608
EMMC NAME (HEX): 48344731640000
EMMC ROM1 (Main User Data) Capacity: 3696 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: H4G1d_ 10667608_20150304_2042.extcsd
Searching for partition tables...
Detected MBR...
Disk Signature: 00000000
MMCBLK0P0 Type: Unknown:0x47 Start: 200 Len: 9FE00
MMCBLK0P1 Type: Unknown:0x47 Start: A0000 Len: 75C000
MMCBLK0P2 Type: Unknown:0x47 Start: 7FC000 Len: 4000
MMCBLK0P3 Type: Extended Start: 800000 Len: E6800000
Warning: Extended Partition Detected - this feature not tested
MMCBLK0P4 Type: Unknown:0x73 Start: 800200 Len: 40000
MMCBLK0P5 Type: Unknown:0x5c Start: 840400 Len: 200000
MMCBLK0P6 Type: Unknown:0xff Start: 106CA600 Len: A8340000
Read Pages Failed, Reason: CARD Data FIFO Timeout Error
Done.
только вот разметку криво бокс отобразил...
[свернуть]