Re: Обновление прошивок eMMC Samsung
#8
прошелся по своим KMVTU000LM-B503
все, кроме одной firmware 0xf1, одна штука 0xfa
взял для пробы одну 0xf1, проапдейтил через ATF, стала прошивка 0xf7
Код:
Z3X EasyJtag Software ver. 1.6.5.3
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: xxxxxxxxxxxxxxxxxx, ,FW Ver.: 01.50
CMD Pullup Level:1784 mV
CMD Active Level:1856 mV
eMMC Device Information
EMMC CID : 15010056545530304DF1A1CB44F76F88
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 Rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 2714453239
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
15:07:55 : Interface Reset OK!
15:07:55 : eMMC Access Type: SECTOR MODE
15:07:55 : eMMC Supported Voltage Range:
15:07:55 : 3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V
15:07:55 :
15:07:55 : CID : 15010056545530304DF1A1CB44F76F89
15:07:55 : CSD : D02701320F5903FFF6DBFFFF8E40406D
15:07:55 :
15:07:55 : eMMC Boot Information
15:07:55 : Revision 1.6 (for MMC v4.5, v4.51)
15:07:55 : BOOT PARTITION : BOOT PARTITION 1
15:07:55 : PARTITION ACCESS : R/W USER PARTITION
15:07:55 : PERM_BOOT_CFG_PROT : DISABLED
15:07:55 : PWR_BOOT_CFG_PROT : DISABLED
15:07:55 : BOOT MODE : x4 SINGLE DATA RATE + LOW SPEED
15:07:55 : RESET BUS WIDTH : ENABLED
15:07:55 : eMMC FirmW UPDATE : DISABLED
15:07:55 : EMMC CACHE SIZE : 0 KB
15:07:55 : SUPER PAGE SIZE : 3584 KB
15:07:55 : HC ERASE GROUP SIZE: 512 KB
15:07:55 : USER AREA SIZE : 15758000128 BYTES
15:07:56 : BOOT PARTITION SIZE: 2048 KB
15:07:56 : RPMB PARTITION SIZE: 128 KB
15:07:56 :
15:07:56 :
15:07:56 : eMMC Device Information
15:07:56 : Manufacturer ID: SAMSUNG
15:07:56 : Device Type : Embedded BGA
15:07:56 : Application ID : 00
15:07:56 : Product Name : VTU00M
15:07:56 : Product Rev : 15.1
15:07:56 : Product SN : A1CB44F7
15:07:56 : Manufactured : January 2012
15:07:56 :
15:07:56 : Card Specific Data
15:07:56 : CSD_STRUCTURE : Extended
15:07:56 : SPEC_VERS : Version 4.1/4.2/4.3
15:07:56 : TAAC : 13 ns
15:07:56 : TRAN_SPEED : 4000000 KHz
15:07:56 : READ_BL_LEN : 512 Bytes
15:07:56 : C_SIZE : HIGH CAPACITY
15:07:56 : WP_GRP_ENABLE : YES
15:07:56 : WRITE_BL_LEN : 512 Bytes
15:07:56 : CONTENT_PROT_APP : NO
15:07:56 : PERM_WRITE_PROTECT: NO
15:07:56 : TMP_WRITE_PROTECT : NO
15:07:56 :
15:07:56 : Extended CSD Saved:
15:07:56 : 15010056545530304DF1A1CB44F76F89.ext_csd
15:07:56 : Backup Directory:
15:07:56 : D:\GSM\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\
15:07:56 :
15:07:59 :
15:07:59 : Task Selected: Samsung eMMC Firmware Update
15:07:59 : ======================================================
15:07:59 : --> This will ERASE USER AREA, BOOT1, BOOT2, and RPMB
15:07:59 : --> This will RESET EXT_CSD Programming Such as BOOT
15:07:59 : Options, Bus Characteristics and Partition Sizes..
15:07:59 : ======================================================
15:07:59 :
15:07:59 :
15:07:59 : ======================================================
15:07:59 : Loading ATF eMMC Firmware File... (Please Wait)
15:07:59 : ======================================================
15:07:59 :
15:07:59 : File Author: ATF Team @ X-Shadow
15:07:59 : Date Created: 21/02/2015 (dd/mm/yyyy)
15:07:59 : Description: Samsung eMMC Firmware
15:07:59 : eMMC Part Number: KMVTU000LM-B503
15:07:59 : eMMC Product Name: VTU00M
15:07:59 : eMMC Product Rev: 15.7
15:07:59 :
15:07:59 : Preparing eMMC for Firmware Update...
15:08:28 : Sending eMMC Firmware Blocks...
15:08:31 : All Blocks Sent!
15:08:31 : Applying eMMC Firmware Update...
15:08:31 : Waiting for Device Re-Initialization...
15:08:31 : Please wait for 30 Seconds...
15:09:01 : Checking eMMC Firmware Update Status...
15:09:02 : eMMC Firmware Update Successful!
15:09:02 :
15:09:02 :
15:09:02 : ======================================================
15:09:02 : Your eMMC is now a Brand New BLANK Device!!!
15:09:02 : ======================================================
15:09:02 : Resize BOOT and RPM Partitions if needed...
15:09:02 : ReWrite BOOT1, BOOT2 and USER Partitions if needed...
15:09:02 : ReWrite EXT_CSD File if needed...
15:09:02 : Make sure eMMC BOOT Options are Correct for your Phone
15:09:02 : ======================================================
15:09:02 :
15:09:02 : Total Elapsed Time 00:01:02
15:09:02 :
15:09:02 :
15:09:12 : Interface Reset OK!
15:09:12 : eMMC Access Type: SECTOR MODE
15:09:12 : eMMC Supported Voltage Range:
15:09:12 : 3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V
15:09:12 :
15:09:12 : CID : 1501005654553030300C201344F7CFB1
15:09:12 : CSD : D02701320F5903FFF6DBFFFF8E40406D
15:09:12 :
15:09:12 : eMMC Boot Information
15:09:12 : Revision 1.6 (for MMC v4.5, v4.51)
15:09:12 : BOOT PARTITION : NOT BOOT ENABLED
15:09:12 : PARTITION ACCESS : R/W USER PARTITION
15:09:12 : PERM_BOOT_CFG_PROT : DISABLED
15:09:12 : PWR_BOOT_CFG_PROT : DISABLED
15:09:12 : BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED
15:09:13 : RESET BUS WIDTH : ENABLED
15:09:13 : eMMC FirmW UPDATE : DISABLED
15:09:13 : EMMC CACHE SIZE : 0 KB
15:09:13 : SUPER PAGE SIZE : 3584 KB
15:09:13 : HC ERASE GROUP SIZE: 512 KB
15:09:13 : USER AREA SIZE : 15758000128 BYTES
15:09:13 : BOOT PARTITION SIZE: 2048 KB
15:09:13 : RPMB PARTITION SIZE: 128 KB
15:09:13 :
15:09:13 :
15:09:13 : eMMC Device Information
15:09:13 : Manufacturer ID: SAMSUNG
15:09:13 : Device Type : Embedded BGA
15:09:13 : Application ID : 00
15:09:13 : Product Name : VTU000
15:09:13 : Product Rev : 0.12
15:09:13 : Product SN : 201344F7
15:09:13 : Manufactured : January 2012
15:09:13 :
15:09:13 : Card Specific Data
15:09:13 : CSD_STRUCTURE : Extended
15:09:13 : SPEC_VERS : Version 4.1/4.2/4.3
15:09:13 : TAAC : 13 ns
15:09:13 : TRAN_SPEED : 4000000 KHz
15:09:13 : READ_BL_LEN : 512 Bytes
15:09:13 : C_SIZE : HIGH CAPACITY
15:09:13 : WP_GRP_ENABLE : YES
15:09:13 : WRITE_BL_LEN : 512 Bytes
15:09:13 : CONTENT_PROT_APP : NO
15:09:13 : PERM_WRITE_PROTECT: NO
15:09:13 : TMP_WRITE_PROTECT : NO
15:09:13 :
15:09:13 : Extended CSD Saved:
15:09:13 : 1501005654553030300C201344F7CFB1.ext_csd
15:09:13 : Backup Directory:
15:09:13 : D:\GSM\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\
15:09:13 :
15:09:27 :
15:09:27 : Task Selected: Write EXT_CSD Backup
15:09:27 : Task Done!
Z3X EasyJtag Box JTAG Софт версия. 1.7.0.2
Loading eMMC Addon Firmware... IO: 1850 mV
Box С/Н: xxxxxxxxxxxxxxxxxx, ,Микропрограмма Вер.: 01.51
Напряжение подтяжки линии CMD :1784 mV
Напряжение активной линии CMD :1856 mV
eMMC Device Information
EMMC CID : 15010056545530304DF7A1CB44F7CF44
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
Изготовитель eMMC: ID: 0015 , OEM ID: 0100
EMMC Date: 12/2012 Rev.0xf7
EMMC NAME: VTU00M , S/N: 2714453239
EMMC NAME (HEX): 56545530304D00
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Раздел 1) Емкость: 2048 kB
EMMC ROM2 (Boot Раздел 2) Емкость: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_2714453239_20150202_1511.extcsd
дамп прошивок 0xf7 и 0xfa надо?
p.s. на данный момент есть дампы:
KLMAG4FE4B-B002_eMMC_Firmware_0x0.bin
KMVYL000LM-B503_eMMC_Firmware_0x19.bin
KMVYL000LM-B503_eMMC_Firmware_0x25.bin
V2W00M_eMMC_Firmware_0x0.bin
V3W00M_eMMC_Firmware_0x0.bin
VTU00M_eMMC_Firmware_0xf1.bin
VTU00M_eMMC_Firmware_0xf7.bin
VTU00M_eMMC_Firmware_0xfa.bin