Application: C:\Program Files\InfinityBox\QCModule\QCModule.exe
Loading data, wait...
[Infinity Box] v1.19
S/N: 0178:010E
Wait...
Current device: Motorola-W210
Done
COM1 [Serial0] selected
Device: Motorola-W210
Checking data, wait...
Action: read information
Connect...
Phone must be Powered-On
error: connect test-2 failed
error: can't establish connection, check cable and com port selection
Connect Fail
Finished, time used: 22 sec
Remove/Install battery now !
COM11 ready
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Read eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 33 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Read eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 10 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Read eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 4 sec
Remove/Install battery now !
COM1 ready
COM1 [Serial0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Read eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 11 sec
Remove/Install battery now !
COM11 ready
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Read eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 34 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
Action: repair ESN
Connect...
Phone must be Powered-On
error: connect test-2 failed
error: can't establish connection, check cable and com port selection
Connect Fail
Finished, time used: 12 sec
Remove/Install battery now !

==== log opened: [15.02.2008 8:45:33] ====
Application: C:\Program Files\InfinityBox\QCModule\QCModule.exe
Loading data, wait...
[Infinity Box] v1.19
S/N: 0178:010E
Wait...
Current device: Motorola-W210
Done
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
Action: read information
Connect...
Phone must be Powered-On
Connect Done
Read phone info...
software compiled: Oct 18 200610:57:49
software released: Jul 18 200516:00:00
software version: /cygdriv*
model id: 108
MSM: F060
build id: KS3.6.10TEST
ESN: 147C02B2
Read phone info Done
Verify access...
Finished, time used: 43 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: repair ESN
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
Connect Done
Initialize...
detecting chip[01]...
flash: 89885500010001:89885500000000
flash: Intel 28F640W30-B B 8Mb
Initialize Done
Set baud...
slowest
Set baud Done
Check parameters...
flash: 89885500010001:89885500000000
reading [Motorola-W210_eeprom]...
file saved: C:\Program Files\InfinityBox\QCModule\backup_Motorola-W210_eeprom_20080215-085011.B2E.bin
software version: 1.0.04.
flex version: FF_A67_0901_1408
LP version: LPH_A67_ASIA9_020
hardware version: MOTOROLA_A67
ESN: 147C02B2
Check parameters Done
Check flash...
Check flash Done
Write...
flash: 89885500010001:89885500000000
Write: eeprom
Write Done
Finished, time used: 41 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
Action: repair ESN
Connect...
Phone must be Powered-On
Connect Done
Read phone info...
software compiled: Oct 18 200610:57:49
software released: Jul 18 200516:00:00
software version: /cygdriv*
model id: 108
MSM: F060
build id: KS3.6.10TEST
ESN: 00000000
Read phone info Done
Verify access...
Verify access Done
Decode data...
error: esn verification failed
Decode data Fail
Finished, time used: 15 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: repair ESN
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
Connect Done
Initialize...
detecting chip[01]...
flash: 89885500010001:89885500000000
flash: Intel 28F640W30-B B 8Mb
Initialize Done
Set baud...
slowest
Set baud Done
Check parameters...
flash: 89885500010001:89885500000000
reading [Motorola-W210_eeprom]...
file saved: C:\Program Files\InfinityBox\QCModule\backup_Motorola-W210_eeprom_20080215-091626.B2E.bin
software version: 1.0.04.
flex version: FF_A67_0901_1408
LP version: LPH_A67_ASIA9_020
hardware version: MOTOROLA_A67
ESN: 0B4239B0
Check parameters Done
Check flash...
Check flash Done
Write...
flash: 89885500010001:89885500000000
Write: eeprom
Write Done
Finished, time used: 44 sec
Remove/Install battery now !
Loading file v.02... 
backup_Motorola-W210_eeprom_20080215-085011.B2E.bin loaded
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Read eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 0 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Skip: Firmware
Skip: Flex/Customization
Skip: Language pack
Skip: FFS/File system
Write: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
Connect Done
Initialize...
detecting chip[01]...
flash: 89885500010001:89885500000000
flash: Intel 28F640W30-B B 8Mb
Initialize Done
Set baud...
slowest
Set baud Done
Check parameters...
flash: 89885500010001:89885500000000
reading [Motorola-W210_eeprom]...
file saved: C:\Program Files\InfinityBox\QCModule\backup_Motorola-W210_eeprom_20080215-092110.B2E.bin
software version: 1.0.04.
flex version: FF_A67_0901_1408
LP version: LPH_A67_ASIA9_020
hardware version: MOTOROLA_A67
ESN: 00000000
Check parameters Done
Check flash...
Check flash Done
Write...
Area: Eeprom
flash: 89885500010001:89885500000000
Write: Eeprom
Write Done
Finished, time used: 106 sec
Remove/Install battery now !

==== log opened: [18.02.2008 3:43:33] ====
Application: C:\Program Files\InfinityBox\QCModule\QCModule.exe
Loading data, wait...
[Infinity Box] v1.19
S/N: 0178:010E
Wait...
Current device: Motorola-W210
Done
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Read flash
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 12 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Read flash
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 1 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Read flash
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 1 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Read flash
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 33 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Read flash
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 4 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
Action: read information
Connect...
Phone must be Powered-On
error: connect test-3 failed
error: can't establish connection, check cable and com port selection
Connect Fail
Finished, time used: 8 sec
Remove/Install battery now !

==== log opened: [18.02.2008 3:51:25] ====
Application: C:\Program Files\InfinityBox\QCModule\QCModule.exe
Loading data, wait...
[Infinity Box] v1.19
S/N: 0178:010E
Wait...
Current device: Motorola-W210
Done
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
Action: read information
Connect...
Phone must be Powered-On
Connect Done
Read phone info...
software compiled: Oct 18 200610:57:49
software released: Jul 18 200516:00:00
software version: /cygdriv*
model id: 108
MSM: F060
build id: KS3.6.10TEST
ESN: 147C02B2
Read phone info Done
Verify access...
Finished, time used: 14 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
Action: read Log
Connect...
Phone must be Powered-On
Connect Done
Read phone info...
software compiled: Oct 18 200610:57:49
software released: Jul 18 200516:00:00
software version: /cygdriv*
model id: 108
MSM: F060
build id: KS3.6.10TEST
ESN: 147C02B2
Read phone info Done
Verify access...
Verify access Done
Decode data...
file saved: C:\Program Files\InfinityBox\QCModule\backup_Motorola-W210_log_20080218-035357.B2X.bin
Decode data Done
Finished, time used: 69 sec
Remove/Install battery now !
Loading file v.02... 
w210_Main_1.2.13.B2M.bin loaded
Loading failed, probably damaged data file.
Loading file v.02... 
w210_LPH_A67_A1_12130_En_Cn.B2P.bin loaded
Loading file v.02... 
w210_Flex_FF_A67_0301_1700.B2F.bin loaded
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
Connect Done
Initialize...
detecting chip[01]...
flash: 89885500010001:89885500000000
flash: Intel 28F640W30-B B 8Mb
Initialize Done
Set baud...
230400
Set baud Done
Check parameters...
flash: 89885500010001:89885500000000
reading [Motorola-W210_eeprom]...
file saved: D:\Prog\W210\1.2.13\backup_Motorola-W210_eeprom_20080218-035808.B2E.bin
software version: 1.0.04.
flex version: FF_A67_0901_1408
LP version: LPH_A67_ASIA9_020
hardware version: MOTOROLA_A67
ESN: 147C02B2
Check parameters Done
Check flash...
Check flash Done
Write...
Area: Firmware
flash: 89885500010001:89885500000000
Write: Firmware
"safe mode" active
Area: Flex/Customization
flash: 89885500010001:89885500000000
Write: Flex/Customization
Area: Language pack
flash: 89885500010001:89885500000000
Write: Language pack
Write Done
Finished, time used: 697 sec
Remove/Install battery now !
Loading file v.02... 
w210_Main_1.0.13n.B2M.bin loaded
Loading file v.02... 
w210_Flex_FF_A67_0901_1703_SFone.B2F.bin loaded
Loading file v.02... 
w210_LPH_A67_A6_10130_En_Ar.B2P.bin loaded
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 12 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 13 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
Connect Done
Initialize...
detecting chip[01]...
flash: 89885500010001:89885500000000
flash: Intel 28F640W30-B B 8Mb
Initialize Done
Set baud...
230400
Set baud Done
Check parameters...
flash: 89885500010001:89885500000000
reading [Motorola-W210_eeprom]...
file saved: D:\Prog\W210\1..013n\backup_Motorola-W210_eeprom_20080218-041537.B2E.bin
software version: 1.2.13.
flex version: FF_A67_0301_1700
LP version: LPH_A67_A1_12130
hardware version: MOTOROLA_A67
ESN: 147C02B2
Check parameters Done
Check flash...
Check flash Done
Write...
Area: Firmware
flash: 89885500010001:89885500000000
Write: Firmware
"safe mode" active
Area: Flex/Customization
flash: 89885500010001:89885500000000
Write: Flex/Customization
Area: Language pack
flash: 89885500010001:89885500000000
Write: Language pack
Write Done
Finished, time used: 718 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
Action: user code
Connect...
Phone must be Powered-On
error: connect test-2 failed
error: can't establish connection, check cable and com port selection
Connect Fail
Finished, time used: 70 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
Action: user code
Connect...
Phone must be Powered-On
Connect Done
Read phone info...
software compiled: Dec 05 200616:11:52
software released: Jul 18 200516:00:00
software version: /cygdriv*
model id: 108
MSM: F060
build id: KS3.6.10TEST
ESN: 147C02B2
Read phone info Done
Verify access...
user code: 1234
Verify access Done
Decode data...
code is not set or unknown eeprom
Decode data Done
Finished, time used: 17 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
Action: repair ESN
Connect...
Phone must be Powered-On
Connect Done
Read phone info...
software compiled: Dec 05 200616:11:52
software released: Jul 18 200516:00:00
software version: /cygdriv*
model id: 108
MSM: F060
build id: KS3.6.10TEST
ESN: 147C02B2
Read phone info Done
Verify access...
Verify access Done
Decode data...
error: can't write esn !
It's need to make "Prepare" operation first !
Decode data Fail
Finished, time used: 15 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: repair ESN
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 1 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: repair ESN
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 3 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: repair ESN
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 39 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: repair ESN
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 24 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: repair ESN
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 35 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: repair ESN
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 49 sec
Remove/Install battery now !
COM1 ready
COM1 [Serial0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: repair ESN
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 17 sec
Remove/Install battery now !
COM1 [Serial0] selected
Device: Motorola-W210
Checking data, wait...
Action: repair ESN
Connect...
Phone must be Powered-On
error: connect test-2 failed
error: can't establish connection, check cable and com port selection
Connect Fail
Finished, time used: 38 sec
Remove/Install battery now !
Loading file v.02... 
w210_repair_eeprom_02.B2E.bin loaded
COM1 [Serial0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 26 sec
Remove/Install battery now !
COM11 ready
Loading file v.02... 
w210_repair_ffs_06.B2E.bin loaded
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Skip: Firmware
Skip: Flex/Customization
Skip: Language pack
Skip: FFS/File system
Write: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 34 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Skip: Firmware
Skip: Flex/Customization
Skip: Language pack
Skip: FFS/File system
Write: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
Connect Done
Initialize...
detecting chip[01]...
flash: 89885500010001:89885500000000
flash: Intel 28F640W30-B B 8Mb
Initialize Done
Set baud...
921600
Set baud Done
Check parameters...
flash: 89885500010001:89885500000000
reading [Motorola-W210_eeprom]...
file saved: D:\Prog\W210\eeprom\backup_Motorola-W210_eeprom_20080218-043922.B2E.bin
software version: 1.0.13.
flex version: FF_A67_0901_1703
LP version: LPH_A67_A6_10130
hardware version: MOTOROLA_A67
ESN: 147C02B2
Check parameters Done
Check flash...
Check flash Done
Write...
Area: Eeprom
flash: 89885500010001:89885500000000
Write: Eeprom
Write Done
Finished, time used: 246 sec
Remove/Install battery now !
Loading file v.02... 
backup_Motorola-W210_eeprom_20080218-041537.B2E.bin loaded
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Skip: Firmware
Skip: Flex/Customization
Skip: Language pack
Skip: FFS/File system
Write: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 1 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Skip: Firmware
Skip: Flex/Customization
Skip: Language pack
Skip: FFS/File system
Write: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
Connect Done
Initialize...
detecting chip[01]...
flash: 89885500010001:89885500000000
flash: Intel 28F640W30-B B 8Mb
Initialize Done
Set baud...
921600
Set baud Done
Check parameters...
flash: 89885500010001:89885500000000
reading [Motorola-W210_eeprom]...
file saved: D:\Prog\W210\1..013n\1backup_Motorola-W210_eeprom_20080218-044613.B2E
software version: 1.0.13.
flex version: FF_A67_0901_1703
LP version: LPH_A67_A6_10130
hardware version: MOTOROLA_A67
ESN: 147C02B2
Check parameters Done
Check flash...
Check flash Done
Write...
Area: Eeprom
flash: 89885500010001:89885500000000
Write: Eeprom
Write Done
Finished, time used: 127 sec
Remove/Install battery now !

==== log opened: [18.02.2008 4:54:43] ====
Application: C:\Program Files\InfinityBox\QCModule\QCModule.exe
Loading data, wait...
[Infinity Box] v1.19
S/N: 0178:010E
Wait...
Current device: Motorola-W210
Done
Loading file v.02... 
w210_Main_1.0.04.B2M.bin loaded
Loading file v.02... 
w210_Flex_FF_A67_0101_1408.B2F.bin loaded
Loading file v.02... 
w210_Flex_FF_A67_0101_1408.B2F.bin loaded
Loading file v.02... 
w210_Main_1.0.04.B2M.bin loaded
Loading file v.02... 
w210_Flex_FF_A67_0101_1408.B2F.bin loaded
Loading file v.02... 
w210_LPH_A67_ASIA2_018_En_Hindi.B2P.bin loaded
Loading file v.02... 
w210_repair_eeprom_x1.B2E.bin loaded
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Write: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
Connect Done
Initialize...
detecting chip[01]...
flash: 89885500010001:89885500000000
flash: Intel 28F640W30-B B 8Mb
Initialize Done
Set baud...
921600
Set baud Done
Check parameters...
flash: 89885500010001:89885500000000
reading [Motorola-W210_eeprom]...
file saved: C:\Program Files\InfinityBox\QCModule\backup_Motorola-W210_eeprom_20080218-045924.B2E.bin
software version: 1.0.13.
flex version: FF_A67_0901_1703
LP version: LPH_A67_A6_10130
hardware version: MOTOROLA_A67
ESN: 147C02B2
Check parameters Done
Check flash...
Check flash Done
Write...
Area: Firmware
flash: 89885500010001:89885500000000
Write: Firmware
"safe mode" active
Area: Flex/Customization
flash: 89885500010001:89885500000000
Write: Flex/Customization
error: 
error: flash write error: 0057E000:00002000
error: 
error: flash write error: 0057E000:00002000
00B6FBDFDFBFFFDFFF9FB7BBDBFBDBBFBFFFDFFFDFDFDBDBDBDB9FFFDBDBFBDFDFDF9FFBFFFBDF9FDFDBFBDFDFFFDBDBFBDB9FDBDBFBDFDFFFDFDFDBDBDBDBF9DFDBDBFBDFDFFFFBDFFBDFFBDBFBDFDFDFDFDFFBDBFBDF9F9FFBDFDBDBFFDBDBDBDBBFFBDBDBDBFFDFDFDFDBFBDFDBDBBFFBFBDFDFFFDFDBDBFBDFDBFBDFDFDFFFDFDFBBDBDBDBFBDFFFDBDBDFFFDFDBFBDFDBDBBFFBFBDBDFFFDB9B9BDBDBDBFBDFFFFBDFDFFFDBDFFBDBFBDFDFDFFFDFFFDFFBDFDBFBDFFBDFDFDF0000FEFFDBDB01010000000000200424F900
Write Fail
Finished, time used: 656 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Write: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 9 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Write: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 7 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Write: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 8 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Write: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 11 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Emergency mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Write: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 16 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Emergency mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Write: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 11 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Write: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 7 sec
Remove/Install battery now !
Loading file v.02... 
w210_Main_1.2.13.B2M.bin loaded
Loading file v.02... 
w210_Flex_FF_A67_0301_1700.B2F.bin loaded
Loading file v.02... 
w210_LPH_A67_A1_12130_En_Cn.B2P.bin loaded
Loading file v.02... 
backup_Motorola-W210_eeprom_20080218-041537.B2E.bin loaded
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Write: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 57 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Read eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 198 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
Action: read information
Connect...
Phone must be Powered-On
error: connect test-2 failed
error: can't establish connection, check cable and com port selection
Connect Fail
restarting...
Finished, time used: 31 sec
Remove/Install battery now !

==== log opened: [18.02.2008 5:26:20] ====
Application: C:\Program Files\InfinityBox\QCModule\QCModule.exe
Loading data, wait...
[Infinity Box] v1.19
S/N: 0178:010E
Wait...
Current device: Motorola-W210
Done
Loading file v.02... 
w210_Flex_FF_A67_1001_1705.B2F.bin loaded
Loading file v.02... 
w210_Main_1.0.13n.B2M.bin loaded
Loading file v.02... 
w210_LPH_A67_A6_10130_En_Ar.B2P.bin loaded
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 48 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
Action: read information
Connect...
Phone must be Powered-On
error: connect test-2 failed
error: can't establish connection, check cable and com port selection
Connect Fail
Finished, time used: 17 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Skip: Firmware
Write: Flex/Customization
Skip: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 25 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Skip: Firmware
Write: Flex/Customization
Skip: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 68 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Skip: Firmware
Write: Flex/Customization
Skip: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 18 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Skip: Firmware
Write: Flex/Customization
Skip: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 7 sec
Remove/Install battery now !

==== log opened: [18.02.2008 9:13:30] ====
Application: C:\Program Files\InfinityBox\QCModule\QCModule.exe
Loading data, wait...
[Infinity Box] v1.19
S/N: 0178:010E
Wait...
Current device: Motorola-W210
Done
Loading file v.02... 
w210_Main_1.0.13n.B2M.bin loaded
Loading file v.02... 
w210_Flex_FF_A67_0901_1703.B2F.bin loaded
Loading file v.02... 
w210_Flex_FF_A67_0901_1703.B2F.bin loaded
Loading file v.02... 
w210_LPH_A67_A6_10130_En_Ar.B2P.bin loaded
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 18 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 4 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Emergency mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 8 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Emergency mode" connection
Action: repair ESN
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 3 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
Action: repair ESN
Connect...
Phone must be Powered-On
error: connect test-2 failed
error: can't establish connection, check cable and com port selection
Connect Fail
Finished, time used: 66 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Emergency mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 15 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Emergency mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 8 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Emergency mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 2 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Emergency mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 1 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Emergency mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 8 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Emergency mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 11 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Emergency mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 25 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
Action: user code
Connect...
Phone must be Powered-On
error: connect test-2 failed
error: can't establish connection, check cable and com port selection
Connect Fail
Finished, time used: 20 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 23 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 5 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 6 sec
Remove/Install battery now !
Current device: Motorola-W200
COM11 [VCP0] selected
Device: Motorola-W200
Checking data, wait...
connection mode: "Repair mode" connection
Action: Read flash
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 20 sec
Remove/Install battery now !
Current device: Motorola-W210
Loading file v.02... 
w210_Main_1.0.13n.B2M.bin loaded
Loading file v.02... 
w210_Flex_FF_A67_0901_1703.B2F.bin loaded
Loading file v.02... 
w210_LPH_A67_A6_10130_En_Ar.B2P.bin loaded
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 15 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 5 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"smart write" enabled
"safe mode" option disabled !
It's strongly recommended to enable "safe mode" !
Are you sure you want to continue w/o "safe mode" ?
Skip: Firmware
Write: Flex/Customization
Skip: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 5 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"smart write" enabled
"safe mode" enabled
Skip: Firmware
Write: Flex/Customization
Skip: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 5 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"smart write" enabled
"safe mode" enabled
Skip: Firmware
Write: Flex/Customization
Skip: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 14 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"smart write" enabled
"safe mode" enabled
Skip: Firmware
Write: Flex/Customization
Skip: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 12 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"smart write" enabled
"safe mode" enabled
Skip: Firmware
Write: Flex/Customization
Skip: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 58 sec
Remove/Install battery now !

==== log opened: [18.02.2008 12:55:01] ====
Application: C:\Program Files\InfinityBox\QCModule\QCModule.exe
Loading data, wait...
[Infinity Box] v1.19
S/N: 0178:010E
Wait...
Current device: Motorola-W210
Done
Loading file v.02... 
w210_Main_1.0.13n.B2M.bin loaded
Loading file v.02... 
w210_Flex_FF_A67_0901_1703.B2F.bin loaded
Loading file v.02... 
w210_Flex_FF_A67_0301_1700_Chinese.B2P.bin loaded
Loading file v.02... 
w210_LPH_A67_A6_10130_En_Ar.B2P.bin loaded
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 14 sec
Remove/Install battery now !
Loading file v.02... 
w210_Main_1.0.13n.B2M.bin loaded
Loading file v.02... 
w210_Flex_FF_A67_0901_1703.B2F.bin loaded
Loading file v.02... 
w210_LPH_A67_A6_10130_En_Ar.B2P.bin loaded
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 41 sec
Remove/Install battery now !
Current device: Motorola-W200
COM11 [VCP0] selected
Device: Motorola-W200
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
error: no data for Firmware
Loading file v.02... 
w210_Main_1.0.13n.B2M.bin loaded
Loading file v.02... 
w210_Flex_FF_A67_0901_1703.B2F.bin loaded
Loading file v.02... 
w210_LPH_A67_A6_10130_En_Ar.B2P.bin loaded
COM11 [VCP0] selected
Device: Motorola-W200
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 50 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W200
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connect Fail
Finished, time used: 5 sec
Remove/Install battery now !
Current device: Motorola-W210
Loading file v.02... 
w210_Main_1.0.13n.B2M.bin loaded
Loading file v.02... 
w210_Flex_FF_A67_0901_1703.B2F.bin loaded
Loading file v.02... 
w210_LPH_A67_A6_10130_En_Ar.B2P.bin loaded
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 8 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer: 
error: can't load bootcode
Connect Fail
Finished, time used: 3 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 5 sec
Remove/Install battery now !
COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 13 sec
Remove/Install battery now !

 COM11 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Repair mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: can't initialize connection
Connect Fail
Finished, time used: 8 sec
Remove/Install battery now !