1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000

Elapsed: 00:00:14

Reconnect Power/Cable!

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Check data ...
Reading NV ...
Saved to : D:\InfinityBox\CM2SPD\phdata\backup\MICROMAX_X2050_ 6531_NV_00008000.nv

Elapsed: 00:01:13

Reconnect Power/Cable!

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo :
Model Vendor : MICROMAX
Model Name : X2050 BY MOBILAGSM.RU
ExtInfo Data : RU,EN
Saved to : D:\InfinityBox\CM2SPD\Read_out\SPD6531_00400000_GD25LQ32_RU,EN__MICROMAX-X2050 BY MOBILAGSM.RU.bin
Done!

Elapsed: 00:00:54

Reconnect Power/Cable!

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Check data... Can take some time

User Code : 12345678

Done!

Elapsed: 00:00:29

Reconnect Power/Cable!

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Process can take some time, please, wait
Init ok, send data
Write done!
Elapsed: 00:00:12

Reconnect Power/Cable!

Settings : SmartFormat is On

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!

Elapsed: 00:00:15

Reconnect Power/Cable!

после формата user code ушел, imei на месте ... все ок.

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...
Model Name : P731A20
Model Brand : ZTE
Model Device: P731A20
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
CompileDate : 1437035828
Project Ver : DIS_RU_QB18D_P731A20V1.0.1
Model Ext : ZTE T221

ExtraInfo : HWInfo not exists, normal phone
ExtraInfo : GSM Phone

Elapsed: 00:00:14

Reconnect Power/Cable!

Loading : Blade_AF3_FPT_S500__V01_m02.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC7731_2341A
PacVersion : Blade_AF3_FPT_S500__V01_m02
FastCheck : 0x36C2723C

Loading files ...

File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : wmodem.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : logo_kernel.bmp
File : logo_uboot.bmp
File : cache.img
File : u-boot.bin
File : SC7731_2341A.xml

Load Ok!

Operation : Flash [ v1.12 ]

======= Flash
Files set for flashing :
[ MCU ] : Blade_AF3_FPT_S500__V01_m02.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC7731_2341A
PacVersion : Blade_AF3_FPT_S500__V01_m02
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : wmodem.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : logo_kernel.bmp
File : logo_uboot.bmp
File : cache.img
File : u-boot.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : CODE
Current ID : PRODNV
Current File : prodnv.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : MODEM_W
Current File : wmodem.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : DSP_W
Current File : DSP_DM_G2.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : MODEM_WCN
Current File : SC8800G_x30g_wcn_dts_modem.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : BOOT
Current File : boot.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : RECOVERY
Current File : recovery.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : BOOTLOGO
Current File : logo_kernel.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : FASTBOOT_LOGO
Current File : logo_uboot.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : ERASEMISC
Current Part : misc
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID : UBOOTLOADER
Current File : u-boot.bin
Flashing now ...
[FlashProc] : Ok!


Elapsed: 00:03:01

Reconnect Power/Cable!

Operation : Read NV [ v1.12 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read NVM Part #1
Part Ok
Read NVM Part #2
Part Ok
Saved to : D:\InfinityBox\CM2SPD\phdata\backup\ZTE_BLADE_AF3_CX_SPDNV.spdnv

Elapsed: 00:00:31

Reconnect Power/Cable!

Operation : Read FullFlash [ v1.13 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 31 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 31 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!


Model Name : P731A20
Model Brand : ZTE
Model Device: P731A20
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : DIS_RU_QB18D_P731A20V1.0.1
Model Ext : ZTE T221

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.22_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

Firmware Size : 1199 MiB
Saved to : C:\InfinityBox\CM2SPD\Read_out\SP7731GEA_P731A20_4.4.2_DIS_RU_QB18D_P731A20V1.0.1\
Done!

Elapsed: 00:11:30

Reconnect Power/Cable!

Operation : Read NV [ v1.13 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 31 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read NVM Part #1
Part Ok
Read NVM Part #2
Part Ok
Saved to : C:\InfinityBox\CM2SPD\Flash\ZTE T221 AF3\CX_SPDNV.spdnv

Elapsed: 00:00:52

Reconnect Power/Cable!

Operation : Read PhoneBook [ v1.13 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 31 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

Mount : /data
Size : 0x00000000934FB000

Step #1
Step #2

Read Ok, PhoneBook records extracted : 26

TXT Saved to : C:\Users\user\Desktop\SPD_PhoneBook.txt
Write : 26
CSV Saved to : C:\Users\user\Desktop\SPD_PhoneBook.csv
Write : 26
VCF Saved to : C:\Users\user\Desktop\SPD_PhoneBook.vcf
Write : 26
VCFv3 Saved to : C:\Users\user\Desktop\SPD_PhoneBook_v3.vcf

Elapsed: 00:00:18

Reconnect Power/Cable!

Operation : Format File System [ v1.13 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 31 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x00000000934FB000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Done!

Elapsed: 00:00:15

Reconnect Power/Cable!

Start at : [29.01.2016 / 12:52:28]
Operation : Format File System [ v1.12 ]
Settings : SmartFormat is On

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 69 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2 Boot Ok
CPU ID : 6531 , FDLStat : 0000
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!

Start at : [29.01.2016 / 9:06:18]
Operation : SP Unlock [ v1.13 ]
Mode : DirectUnlock

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 30 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 eMMC loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Checking Structure ...
SimLock state : Locked!
Unlocking ...
Unlock Done!

Elapsed: 00:00:15

Reconnect Power/Cable!

Start at : [29.01.2016 / 9:08:14]
Operation : Read FullFlash [ v1.13 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 30 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 eMMC loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 30 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 eMMC loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!


Model Name : P172R12
Model Brand : ZTE
Model Device: P172R12
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715EA
Project Ver : MGF_RU_QB18D_P172R12V1.0.2
Model Ext : ZTE T220

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W14.51_Release.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

Firmware Size : 1198 MiB
Saved to : E:\ZTE_Blade_A3_(SC7715)\SCX15_SP7715EA_P172R12_4.4.2_MGF_RU_QB18D_P172R12V1.0.2\
Done!

Elapsed: 00:19:52

Reconnect Power/Cable!

Finish at : [29.01.2016 / 9:28:07]

Operation : Check/Read Info [ v1.15 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 569 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : NAND Flash , Structure : Ok!

Reading extended info ...

Model Name : A238t
Model Brand : Lenovo
Model Device: A238t
AndrVersion : 2.3.5
BaseBand CPU: SP8830GA
CompileDate : 07.07.2014 3:17:46
Project Ver : MDroid2.3.5
Model Ext : Lenovo A238t

ExtraInfo : HWInfo not exists, normal phone
ExtraInfo : TDMA Phone

Elapsed: 00:00:49

Reconnect Power/Cable!

Operation : Format File System / Reset Settings [ v1.15 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 569 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected NAND Flash , Structure detect Ok!

Formatting NAND Flash
Format UserData
Format Ok!
Format Cache
Format Ok!

Done!

Elapsed: 00:00:17

Reconnect Power/Cable!

Operation : Read NV [ v1.15 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 569 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected NAND Flash , Structure detect Ok!

Read NVM Part #1
Part Ok
Read NVM Part #2
Part Ok
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\Lenovo A238t\CX_SPDNV.spdnv

Elapsed: 00:00:34

Reconnect Power/Cable!

Operation : Read NV [ v1.15 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 569 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected NAND Flash , Structure detect Ok!

Read NVM Part #1
Part Ok
Read NVM Part #2
Part Ok
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\Lenovo A238t\Gold Copy NV\CX_SPDNV.spdnv

Elapsed: 00:00:36

Reconnect Power/Cable!

Operation : Read FullFlash [ v1.15 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 569 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok , 0x13 , NAND : b256k
[FW_READER] : Step #3 Passed!

Model Name : A238t
Model Brand : Lenovo
Model Device: A238t
AndrVersion : 2.3.5
BaseBand CPU: SP8830GA
Project Ver : MDroid2.3.5
Model Ext : Lenovo A238t

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_td.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc8830_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : sc8830_modem_sc8830_cp2.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img

AndroidInfo created
Firmware Size : 265 MiB
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\Lenovo A238t\Pac\SP8830GA_[NAND_b256k]_A238t_2.3.5_MDroid2.3.5_Lenovo_A238t\
Done!

Elapsed: 00:18:58

Reconnect Power/Cable!

Start at : [15.03.2016 / 19:37:47]
Operation : SP Unlock [ v1.14 ]
Mode : DirectUnlock

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Checking Structure ...
SimLock state : Locked!
Unlocking ...
Unlock Done!

Elapsed: 00:00:15

Reconnect Power/Cable!

Finish at : [15.03.2016 / 19:38:02]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 23 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 23 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name : ALCATEL_ONETOUCH_4024D
Model Brand : TCL
Model Device: ALCATEL_ONETOUCH_4024D
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_18045
Project Ver : 4024D_RU_AL_V1.8_150921
Model Ext : 4024D

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 1242 MiB
Saved to : C:\Users\botir\Desktop\SP7731GEA_18045_ALCATEL_ONETOUCH_4024D_4.4.2_4024D_RU_AL_V1.8_150921_4024D\
Done!

Operation : Read FullFlash [ v1.16 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 17 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0000
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo :
Model Vendor : Alcatel
Model Name : 1060
ExtInfo Data : Eng_Ita
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_00400000_GD25LQ32_Eng_Ita__Alcatel-1060.bin
Done!

Elapsed: 00:00:36

Reconnect Power/Cable!

Operation : Read NV [ v1.16 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 17 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0000
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Check data ...
Reading NV ...
Saved to : D:\Mobile\Alcatel\1060 (Orange Riga)\cm2\nv\6531_NV_00008000.nv

Elapsed: 00:00:23

Reconnect Power/Cable!

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo :
Model Vendor : micromax
Model Name : x2050
ExtInfo Data : rus
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_00400000_GD25LQ32_rus__micromax-x2050.bin
Done!

Elapsed: 00:01:03

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Check data ...
Reading NV ...
Saved to : C:\InfinityBox\CM2SPD\Read_out\6531_NV_00008000.nv

Elapsed: 00:00:22

Operation : Read NV [ v1.16 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 17 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Check data ...
Reading NV ...
Saved to : C:\InfinityBox\CM2SPD\Read_out\6531_NV_00008000.nv

Elapsed: 00:00:32

Reconnect Power/Cable!

Operation : Read FullFlash [ v1.16 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 17 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo :
Model Vendor : Philips
Model Name : e120
ExtInfo Data : Eng_PL
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_00400000_GD25LQ32_Eng_PL__Philips-e120.bin
Done!

Elapsed: 00:00:36

Reconnect Power/Cable!

==== Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo :
Model Vendor : ARTEL
Model Name : E508
ExtInfo Data : RUS,UZBEK
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_00400000_GD25LQ32_RUS,UZBEK__ARTEL-E508.bin
Done!

Elapsed: 00:00:52

==== Wait for phone...

Phone found! [ 29 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : CODE
Current ID : PRODNV
Current File : prodnv.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : MODEM_W
Current File : 5735c2_modem_EA.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : DSP_W
Current File : DSP_DM_G2.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : MODEM_WCN
Current File : SC8800G_8830_wcn_modem_EC_zerocopy.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : BOOT
Current File : boot.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : RECOVERY
Current File : recovery.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : BOOTLOGO
Current File : DM_bootlogo-600x1024_1.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : FASTBOOT_LOGO
Current File : CU_svga_logo_256.bmp(1)
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : ERASEMISC
Current Part : misc
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID : UBOOTLOADER
Current File : u-boot.bin
Flashing now ...
[FlashProc] : Ok!


Elapsed: 00:02:27

Reconnect Power/Cable!