Re: SСout - мощный Motorola мультифлешер
#3
Цитата:
Сообщение от alexi
принимая во внимание комментарии и предложения большинства пользователей
|
ОФФтопик:
интересно какие именно, |
надеюсь этот шаг не повлияет на самостоятельное развитее смартклипа? а то продукт могут и забросить
ОФФтопик:
незнаю - радостная ли эта новость. |
System requirements
SCout is fully compatible with any PC hardware configuration, as soon as it supports Win2000/XP and is equipped with minimum 2 USB 2.0 ports.
P2K
Flashing process of P2K and I-mode platform handsets requires a phone driver to be installed. Universal driver for all models is available within SCout directory (SCout\drivers\). To install the driver: connect your handset to PC, the system will detect a new device, locate the driver and run the installation as many times as the system will require it.
P2K based models can be flashed using 4 types of flash files: *.pcf, *.shx, *.sbf and *.sh.
*.pcf – flash files produced by the product developers, SmartMoto compatible.
*.shx, *.sbf, *.sh –flash and flex files from handset’s manufacturer.
P2K flashing procedure
Connect SCout dongle to PC USB port.
Launch SCout software.
Connect the handset/handsets* to PC USB port using data cable.
Software should detect the handset/handsets, providing the following information:
Model
IMEI
User code
Security code
Operation band
Firmware
Flex version
Language pack
Press "Browse" to locate arequired flash file.
Select the handset/handsetsfrom "Connected phones" list.
Press "Flash selected phone"(if you are working with a singlehandset), or "Flash all phones" (in case of working with several items).
Disconnect the handset as soonas the process is finished.
New firmware is installed intothe phone.
*SCout functionality allows flashing of up to 16 P2K based handsets simultaneously.
Note
Phone model F3 is a P2K based model – however, it requires to be connected using specific Motofone F3 flashing cable. In this case there is no need to install a phone driver, unlike for the rest of P2K models. Cable driver is required only.
Motofone F3 flashing procedure
Connect SCout dongle to PC USB port.
Launch SCout software.
Connect the phone/phones* to PC USB port using data cable.
Press Poll serial ports for ODM. Software should detect the handset/handsets, providing the following information:
Model
IMEI
User code
Security code
Operation band
Firmware
Flex version
Language pack
Press "Browse" to locate a required flash file.
Select the handset/handsets from "Connected phones" list.
Press "Flash selected phone" (if you are working with a single handset), or "Flash all phones" (in case of working with several items).
Disconnect the handset as soon as the process is finished.
New firmware is installed into the phone.
*SCout functionality allows flashing of up to 16 P2K based handsets simultaneously.
Additional buttons
Poll serial ports for ODM – this function establishes communication with the handset (Motofone F3), connected via cable with virtual COM port emulator.
Refresh phone list – updates the information about all past and current phone connections.
Service Functions (P2K models only)
Activate phone "Java App Loader" option – activates the Java applet in the phone’s menu.
Reset phone Life Timer - returns phone life timer back to "0" (zero).
Master Reset - resets all customer settings to default factory settings.
Master Clear - clears all customer data.
Enable Unicode – the option allows setting the phone to receive SMS in Unicode.
Set subsidy code to "00000000" – in case of flashing with a branded flash file, the handset may require a subsidy code to be entered. It is recommended to set the code value to "00000000" (eight times zero) before actual flashing – thus the user will be able to enter it when the SIM-card is inserted into the phone. If the code has not been reset to "00000000" (eight times zero) the handset will require unlock procedure to be performed in this case.
Battery settings – for the best phone performance is recommended to create backup of the battery settings before performing a flash operation and restore them after completing the flash.
I-mode
Flashing procedure for I-mode handsets is similar to flashing of P2K models.
The handset requires to be connected to PC via Mini USB data cable and the phone driver has to be installed. Universal driver for all models is available within SCout directory (SCout\drivers\). To install the driver: connect your handset to the PC, system will detect a new device, locate the driver and run the installation as many times as system will require it. As soon as the driver is installed, the virtual COM port will be added to the system. Usually it will be the port of the highest number. To check the number, please perform the following: right click on My Computer >> Properties >> Hardware >> Device Manager >> Ports (COM & LPT).
There are 2 flash file formats to be used for flashing I-mode models:
*.sfl – flash files introduced by product developer
*.ipl – flash files from the handset manufacturer
Every entire I-mode flash file consists of 3 components: flash *.bin, loader *.ldr and boot *.br. They are parts of a single flash file and can not be flashed separately.
I-mode flashing procedure
Connect SCout dongle to PC USBport.
Launch SCout software.
Connect powered handset to PC USB port using data cable.
Select an appropriate COM port into which the I-mode is installed (usually this is the highest port number).
Press "Browse" button to locate a required flash file.
Field "Package is targeted for" informs about selected file.
Press "Flash selected phone".
Status bar informs about flashingprogress.>
Message "Flash completed" informs that the process is finished successfully.
Compal (Calypso)
For flashing purposes Compal (Calypso) models require to be connected to PC USB via flashing cable with built-in virtual COM port emulator. In this case the handset driver is not required. Cable driver is only needed to be installed. As soon as the driver is installed, the virtual COM port will be added to the system. Usually it will be the port of the highest number. To check the number, please perform the following: right click on My Computer >> Properties >> Hardware >> Device Manager >> Ports (COM & LPT).
Support team recommends to use original cables and drivers, produced by product developers only. We can not guarantee stable operation in case of applying accessories from other developers.
Compal (Calypso) based models can be flashed with the following flash files formats:
*.sfl – flash files introduced by product developer
*.mot, *.m0 – flash files from the handset manufacturer
There are 3 types of flash files for Compal (Calypso) models:
flash;
lang_pak;
flex.
Each file can be flashed separately or in combination with other.
Attention
While flashing files in combination, the following sequence has to be observed.
Flash file.
Lang_pack.
Flex.
If the flash file is locked and the flex is sp lock free, please always flash flex file as the last one and DO NOT POWER ON THE PHONE after writing the flash before using the flex file.
In case of ignoring this Note, the handset will become locked and will require to be served with any unlocking tool.
Compal (Calypso) flashing procedure
Connect SCout dongle to PC USB port.
Launch SCout software.
Connect Powered OFF handset* to PC using data cable.
Select phone group E585_MP (the most common for Compal models).
Select required COM port on which the Compal is connected (usually this is the highest port number).
Press "Browse" to locate appropriate flash file/files.
Press "Flash selected phone".
Press Power ON button on the phone as soon as the software shows the corresponding massage.
Flashing process starts.
Message "Flash completed" informs that the process is finished successfully.
*SCout functionality allows flashing of up to 16 Compal based handsets simultaneously. The handsets have to be connected one-by-one. As soon as flashing of the first phone is started, the second one can be connected, an appropriate COM port has to be selected. Allocate flash file and start flashing process.
неьольшой фак:
1. Can I use SCout for unlocking?
2. I received my SCout dongle but the cables are not in the set. Where shall 3. I get the cables and drivers?
4. What platforms are supported by SCout?
5. Does SCout require to be registered or activated?
Is it possible to flash few handsets simultaneously?
6.Does SCout support multi flashing of other platforms?
1. Can I use SCout for unlocking?
SCout is a flasher. It supports flashing options only. No unlocking is possible with this product.
2. I received my SCout dongle but the cables are not in the set. Where shall I get the cables and drivers?
Cables are optional and sold separately. Please check the Accessories tab. Drivers can be downloaded for free from Ammunition > Soft & Drivers section.
3. What platforms are supported by SCout?
SCout supports flashing of P2K, I-mode and Compal models. Other platforms are currently under development.
4. Does SCout require to be registered or activated?
SCout activation is performed automatically with the first dongle update. No other registration is required.
5. Is it possible to flash few handsets simultaneously?
SCout functionality allows flashing of up to 16 P2K/Compal based handsets simultaneously.
6. Does SCout support multi flashing of other platforms?
Multi flashing of Compal and P2K based handsets is already supported. Multi flash option of I-mode models is currently under development.
Думаю многие поймут и без перевода.
Последние файлы
