Последние файлы
Наши партнеры
Важная информация
Z800, белый экран при включении, не финализируется
SonyEricsson серия - A36xx/J2xx/K7xx(i)/T6xx/T10x/T2xx/T300/R600/P800/P900/P910(i)...
Ответ
 
Опции темы
  • Новое
    Аватар для IRoN

    IRoN
    Новичок

    Сообщений:
    14
    Регистрация:
    18.07.2007
    Возраст:
    39
    Рейтинг мнений:
    Вес репутации: 0
    IRoN
    Очки: 3,117, Уровень: 34 Очки: 3,117, Уровень: 34 Очки: 3,117, Уровень: 34
    Активность: 0% Активность: 0% Активность: 0%
    По умолчанию Z800, белый экран при включении, не финализируется #1
    Код:
    v0.914039/UNI
    CARD SERIAL: 00069236
    Loaded 51 flash descriptors
    Connecting to UFS...
    Found 3 FTDI device(s).
    UFS #76913 READY
    
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:36
    Speed:460800
    OTP LOCKED:1 CID:36 PAF:1 IMEI:35599100285242 CERT:RED
    Restarting...
    ChipID:7100,EMP protocol:0301
     
    PHONE IS BROWN
    FLASH CID detected:36
    Speed:460800
    OTP LOCKED:1 CID:36 PAF:1 IMEI:35599100285242 CERT:BROWN
    LDR:041214 0759 MATCXC1325712_PRODUCTION R2Z
    Flash ID check:890D
    Flash props sent ok
    Switching to USB...
    interface not changed
    writing C:\Program Files\setool2g\eroms\db2000\z800_v800_k600_old_erom.ssw
    CURRENT FLASH FILE CID:254
    SSW uses dynamic hash, dynamic hash len is:4
    Will flash 4 blocks...
    SSW loading returns:0
    Elapsed: 33 secs.
    ChipID:7100,EMP protocol:0301
     
    PHONE IS BROWN
    FLASH CID detected:36
    Speed:460800
    OTP LOCKED:1 CID:36 PAF:1 IMEI:35599100285242 CERT:BROWN
    LDR:041214 0759 MATCXC1325712_PRODUCTION R2Z
    Flash ID check:890D
    Flash props sent ok
    Switching to USB...
    interface not changed
    writing C:\Temp\r1ab013_eu_main.cry
    CURRENT FLASH FILE CID:254
    SSW uses dynamic hash, dynamic hash len is:268
    Will flash 268 blocks...
    SSW loading returns:0
    writing C:\Temp\r1ab013_fs.emea1.cry
    CURRENT FLASH FILE CID:254
    SSW uses dynamic hash, dynamic hash len is:93
    Will flash 93 blocks...
    SSW loading returns:0
    Setting up GDFS...
    Writing simlocks...
    ALL UNLOCK/LOCK CODES SET TO "00570535"
    Signing...
    control keys complete.
    full sig complete.
    LDR:040616 1028 GOHCXC125904_SEMC_FILE_SYSTEM_LOADER_R2B
    loader startup: executed
    loader GDFS startup: executed
    wrong response, break.
    loader fs startup failed, that is fatal
    PROCEDURE WAS STOPPED BY USER
    Elapsed: 695 secs.
    POSSIBLE GDFS FILE DETECTED, EXTRACTING PHONEBOOK
    PHONEBOOK NOT DETECTED IN GDFS FILE
    ChipID:7100,EMP protocol:0301
     
    PHONE IS BROWN
    FLASH CID detected:36
    Speed:460800
    OTP LOCKED:1 CID:36 PAF:1 IMEI:35599100285242 CERT:BROWN
    LDR:041214 0759 MATCXC1325712_PRODUCTION R2Z
    Flash ID check:890D
    Flash props sent ok
    Switching to USB...
    interface not changed
    LDR:040616 1028 GOHCXC125904_SEMC_FILE_SYSTEM_LOADER_R2B
    loader startup: executed
    loader GDFS startup: executed
    wrong response, break.
    loader fs startup failed, that is fatal
    PROCEDURE WAS STOPPED BY USER
    Elapsed: 35 secs.
    Will write GDFS now.
    ChipID:7100,EMP protocol:0301
     
    PHONE IS BROWN
    FLASH CID detected:36
    Speed:460800
    OTP LOCKED:1 CID:36 PAF:1 IMEI:35599100285242 CERT:BROWN
    LDR:041214 0759 MATCXC1325712_PRODUCTION R2Z
    Flash ID check:890D
    Flash props sent ok
    Setting up GDFS...
    format gdfs complete.
    will write 1080 variables
    done
    Phone detached
    Elapsed: 36 secs.
    ChipID:7100,EMP protocol:0301
     
    PHONE IS BROWN
    FLASH CID detected:36
    Speed:460800
    OTP LOCKED:1 CID:36 PAF:1 IMEI:35599100285242 CERT:BROWN
    LDR:041214 0759 MATCXC1325712_PRODUCTION R2Z
    Flash ID check:890D
    Flash props sent ok
    Setting up GDFS...
    IMEI MISMATCH !!!! POSSIBLE STOLEN PHONE !!!!!
    ORIGINAL IMEI:35599100285242
    CURRENT  IMEI:35599100272782
    Writing simlocks...
    ALL UNLOCK/LOCK CODES SET TO "77234525"
    Signing...
    control keys complete.
    full sig complete.
    Unlock DONE
    Elapsed: 15 secs.
    ChipID:7100,EMP protocol:0301
     
    PHONE IS BROWN
    FLASH CID detected:36
    Speed:460800
    Flash ID check:890D
    Flash props sent ok
    OTP LOCKED:1 CID:36 PAF:1 IMEI:35599100285242 CERT:BROWN
    FLASH CID:36 COLOR:BROWN
     
    Model:Z800
    Brand:Generic
    MAPP CXC article: R1AB014     prgCXC1250046_EU_1_VI
    MAPP CXC version: R1AB014
    Language Package:EMEA_1
    CDA article: CDA102371/1
    CDA version: R3A
    Default article: cxc1250055
    Default version: R1AB014
    PROVIDER: 000-00
    SIMLOCKS NOT DETECTED
     
    USERCODE:0000
     
    Elapsed: 3 secs.
    Closing UFS at your request.
    FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
     
    MODEL:Z800i
    CDA: CDA102390/44
    CDA REV: R1A
    VARIANT:EUROPE_1
    LANGUAGE: EN PT ES FR
     
    Connecting to UFS...
    Found 3 FTDI device(s).
    UFS #76913 READY
    ChipID:7100,EMP protocol:0301
     
    PHONE IS BROWN
    FLASH CID detected:36
    Speed:460800
    OTP LOCKED:1 CID:36 PAF:1 IMEI:35599100285242 CERT:BROWN
    LDR:041214 0759 MATCXC1325712_PRODUCTION R2Z
    Flash ID check:890D
    Flash props sent ok
    Switching to USB...
    interface not changed
    Setting up GDFS...
    Writing simlocks...
    ALL UNLOCK/LOCK CODES SET TO "50127805"
    Signing...
    control keys complete.
    full sig complete.
    LDR:040616 1028 GOHCXC125904_SEMC_FILE_SYSTEM_LOADER_R2B
    loader startup: executed
    loader GDFS startup: executed
    wrong response, break.
    loader fs startup failed, that is fatal
    PROCEDURE WAS STOPPED BY USER
    Elapsed: 183 secs.
    ChipID:7100,EMP protocol:0301
     
    PHONE IS BROWN
    FLASH CID detected:36
    Speed:460800
    OTP LOCKED:1 CID:36 PAF:1 IMEI:35599100285242 CERT:BROWN
    LDR:041214 0759 MATCXC1325712_PRODUCTION R2Z
    Flash ID check:890D
    Flash props sent ok
    Switching to USB...
    interface not changed
    Phone reverted to RED color.
    LDR:040616 1028 GOHCXC125904_SEMC_FILE_SYSTEM_LOADER_R2B
    loader startup: executed
    loader GDFS startup: executed
    виснет на loader GDFS startup: executed, кастомизацию не проходит
    при включении - белый экран.

    На UFS - KZF при включении выдает следующее
    Код:
    1832      IPC_TX: PHY_INIT_REQь
    BuildInfo: Label: <ld_violetta_crh109338_r7h_ec_iso> Variant: <U100_PHONE_WCDMA_4MBRAM> 
    BuildInfo: Generated: 2005-04-29 17:44 by ECSEKDA
    Product  : <Sony Ericsson Z800> Version: 0000
    HW Setup : Marita P2A (Id:0x7100) IRDA: B018 BT: C018 RS232: A018 
    Vendor   : <Sony Ericsson> PNP: SER USB: 0FCE BT: 0000 
    OS: core startup of System
    OS: Installing static device drivers
    OS: Starting RTC
    OS: current time Mon Jan 10 15:04:26 2000
    OS: Starting HEAP
    OS: Memscan found Flash @ 0x20000000 Size=0x2000000
    OS: Memscan found RAM   @ 0x28000000 Size=0x800000
    OS: Memscan found unknown area @ 0x2c000000 Size=0x400
    OS: Starting FSS
    OS: Starting FAM
    OS: Flash area base:0x20000000 size:0x2000000 driver:cfi params:
    OS: Executable flash area base:0x20000000 size:0x1700000
    FS: *** This is SEMC FS ***
    FS: Server processes started.
    FSFLASH: CPU is ARM 946, revision 1, architecture 5
    FSFLASH: Inst Cache size is 32.00 Kb, 4-way, 32 bytes/line.
    FSFLASH: Data Cache size is 16.00 Kb, 4-way, 32 bytes/line.
    FSFLASH: NOR Flash device @ [0x20000000-0x21FFFFFF] 32768 Kb
    FSFLASH: Vendor (0x89): Intel
    FSFLASH: Device ID: 0x880D
    FSFLASH: Write Buffer Size: 64 bytes
    FSFLASH: Erase region [0x20000000-0x21FDFFFF] has an erase block size of 128 Kb
    FSFLASH: Erase region [0x21FE0000-0x21FFFFFF] has an erase block size of 32 Kb
    FSFLASH: Write processes started, pid = 0x10032.
    FSFLASH: Erase processes started, pid = 0x10033.
    FSFLASH: Logical flash block size is 256 Kb
    FSFLASH: File system flash segment 0 located in NOR @ [0x21200000,0x21EFFFFF] (13312 Kb)
    FSFLASH: Pack Process started, pid = 0x10034.
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 1024 bytes requested in total ****
    FSFLASH: 52 flash block(s) available (out of 52)
    FSFLASH: Number of AVAILABLE file system blocks: 13004
    FSFLASH: Number of USED file system blocks: 5776
    FSFLASH: Number of DIRTY file system blocks: 290
    FSFLASH: Number of CLEAN file system blocks: 309
    FSFLASH: Number of BAD file system blocks: 0
    FS: Mounting file system partition /
    FSCK: Phone not properly shut down, running FSCK on partition /
    FSCK: FSCK level is 1
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 1302 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 4902 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 6204 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 7228 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 8252 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 9404 bytes requested in total ****
    FSCK: Checking Inodes Pass 1
    FSCK: Directory Check Pass 1
    FSCK: Re-creating Free List
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 10022 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 11046 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 12070 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 13094 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 14118 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 15142 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 16166 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 17190 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 18214 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 19238 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 20262 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 21286 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 23334 bytes requested in total ****
    FSCK: Checking 1800 Inodes Pass 2
    FSCK: Directory Check Pass 2
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 24614 bytes requested in total ****
    FSCK: Directory entry referencing free inode 0x20b, /tpa/settings/wap/stk/auth/index.dat removed.
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 25894 bytes requested in total ****
    FSCK: Directory entry referencing free inode 0x209, /tpa/settings/wap/stk/cookie/index.dat removed.
    FSCK: File System Size: 10159
    FSCK: Number of Free Data Blocks: 4917
    FSCK: Number of Used Data Blocks: 5242
    FSCK: Number of Free Inodes: 1310
    FSCK: Number of Free Links: 1311
    FSCK: Creating RamDir entries.
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 29222 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 38438 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 54054 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 89382 bytes requested in total ****
    MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 164646 bytes requested in total ****
    FSCK: Done
    FS: Mounting file system partition /tpa/system/bg_images/cache
    FS: Mounting file system partition /ifs
    FSCK: Phone not properly shut down, running FSCK on partition /ifs
    FSCK: FSCK level is 1
    FSCK: Checking Inodes Pass 1
    FSCK: Directory Check Pass 1
    FSCK: Re-creating Free List
    FSCK: Checking 304 Inodes Pass 2
    FSCK: Directory Check Pass 2
    FSCK: Directory entry referencing free inode 0xac, /pdh/0002/DEFS removed.
    FSCK: Directory entry referencing free inode 0xab, /messaging/sms/temp001.sms removed.
    FSCK: File System Size: 656
    FSCK: Number of Free Data Blocks: 291
    FSCK: Number of Used Data Blocks: 365
    FSCK: Number of Free Inodes: 214
    FSCK: Number of Free Links: 216
    FSCK: Creating RamDir entries.
    FSCK: Done
    FS: Mounting file system partition /system
    FS: Mounting file system partition /smsdataOS: Starting FATFM
    Prototype start process started!
    MPH NullState
    RLC: RLC_LLC
    RLC: RLC_IDLE_REQ = 7600
    RLC: RLC_GMM_DATA_REQ = 7601
    RLC: RLC_DATA_REQ = 7602
    RLC: RLC_UNITDATA_REQ = 7603
    RLC: RLC_RLC_DATA_REQ = 7605
    RLC: RLC_RLC_UNITDATA_REQ = 7606
    RLC: RLC_DATA_RSP = 7607
    RLC: LLC_RLC
    RLC: RLC_DATA_CNF = 7610
    RLC: RLC_DATA_IND = 7611
    RLC: RLC_STATUS_IND = 7612
    RLC: RR_RLC
    RLC: RR_TBF_ESTABLISH_REQ = 7145
    RLC: RR_UPLINK_TBF_RELEASE_REQ = 7147
    RLC: RR_DOWNLINK_TBF_RELEASE_REQ = 7148
    RLC: RR_TBF_RELEASE_RSP = 7149
    RLC: RR_DOWNLINK_ACK_NACK_REQ = 7150
    RLC: RLC_RR
    RLC: RR_TBF_ESTABLISH_CNF = 7155
    RLC: RR_UPLINK_TBF_RELEASE_CNF = 7157
    RLC: RR_DOWNLINK_TBF_RELEASE_CNF = 7158
    RLC: RR_TBF_ESTABLISH_IND = 7156
    RLC: RR_TBF_RELEASE_IND = 7159
    RLC: RR_UPLINK_ACK_NACK_IND = 7160
    RLC: PH_RLC
    RLC: PH_RLC_DATA_REQ = 7485
    RLC: PH_RLC_DATA_RELEASE_REQ = 7486
    RLC: PH_RLC_CONTROL_REQ = 7487
    RLC: PH_RLC_CONTROL_CONTROL_0_REQ = 7489
    RLC: PH_RLC_CONTROL_CONTROL_1_REQ = 7490
    RLC: PH_RLC_CONTROL_CONTROL_2_REQ = 7491
    RLC: PH_RLC_CONTROL_CONTROL_3_REQ = 7492
    RLC: PH_RLC_CONTROL_CONTROL_4_REQ = 7493
    RLC: PH_RLC_CONTROL_CONTROL_5_REQ = 7494
    RLC: PH_RLC_CONTROL_DATA_0_REQ = 7495
    RLC: PH_RLC_CONTROL_DATA_1_REQ = 7496
    RLC: PH_RLC_CONTROL_DATA_2_REQ = 7497
    RLC: PH_RLC_CONTROL_DATA_3_REQ = 7498
    RLC: PH_RLC_CONTROL_DATA_4_REQ = 7499
    RLC: PH_RLC_CONTROL_DATA_5_REQ = 7500
    RLC: PH_RLC_RELEASE_REQ = 7501
    RLC: RLC_PH
    RLC: PH_RLC_DATA_CNF = 7505
    RLC: PH_RLC_DATA_IND = 7506
    RLC: PH_RLC_DATA_RTS_IND = 7507
    RLC: PH_RLC_DATA_RELEASE_CNF = 7508
    RLC: PH_RLC_CONNECT_IND = 7509
    RLC: PH_RLC_CONTROL_CNF = 7510
    RLC: PH_RLC_CONTROL_IND = 7511
    RLC: PH_RLC_RELEASE_CNF = 7512
    RLC: RLC_TIMER
    RLC: RLC_TIMER_T3164 = 7680
    RLC: RLC_TIMER_T3166 = 7681
    RLC: RLC_TIMER_T3180 = 7682
    RLC: RLC_TIMER_T3182 = 7683
    RLC: RLC_TIMER_T3190 = 7684
    RLC: RLC_TIMER_T3192 = 7687
    RLC_UL: S I
    RR: PID 65611
    RR: MPH_TIMER_PRIM 7800 
    RR: RR_TIMER_PRIM 7825 
    RR: MPH_RR_PRIM 6945 
    RR: RR_MPH_PRIM 7005 
    RR: RR_RLC_PRIM 7145 
    RR: RLC_RR_PRIM 7155 
    RR: PH_MPH_PRIM 7245 
    RR: MPH_PH_PRIM 7315 
    RR: PH_RLC_PRIM 7485 
    RR: RLC_PH_PRIM 7505 
    RR: DL_RR_PRIM 7045 
    RR: RR_DL_PRIM 7055 
    RR: GAS_WAS_PRIM 10345 
    RR: WAS_GAS_PRIM 10305 
    RR: 7375 <= MPH->CB <= 7384
    RR: 7315 <= MPH->PH < 7374
    RR: 7245 <= PH->MPH < 7314
    RR: 7425 <= MMM->MPH <= 7434
    RR: 7415 <= MPH->MMM < 7424
    RR: 7005 <= RR->MPH <= 7044
    RR: 7375 <= MPH->CB <= 7384
    RR: 7115 <= RR->MMM < 7124
    RR: 6925 <= RR->MM < 6934
    LLC: PID 65615
    LLC: <SMS 4048
    LLC: >SMS 4059
    LLC: <SNDCP 7555 7563
    LLC 1: state 0
    LLC 3: state 0
    LLC 5: state 0
    LLC 7: state 0
    LLC 9: state 0
    LLC 11: state 0
    RLC_DL: S I
    WHAM_HW_ControlProcess is runningLLDebug_Init: LLDEBUG cable detected
    ACB/Debug driver: LLDEBUG cable detected
    ACB/Debug driver: Error PD_GPIO_InterruptUnsubscribe failed
    ### Print Server: Requesting DebugMux channel...
    436       ### Print Server: Started OK
    437       SetIpc_Receiver PHY_Master called by Pid=65672
    437       [SIM] State Changed: SIM_STATE_NULL, Appl: 0, Ref: 0
    438       [ICC-LD] ICC_Reader_0_Process StartedE
    438       [ICC-LD] Status Changed: ICC_READER_DEACTIVATED, Reader: 0
    438       Load Module Starter: Hunt for Program Manager failed
    A
    MM: reset TMSI
    439       MM: No valid GSM keys
    439       MM: No valid WCDMA keys
    439       MM: TVP Probe P_UAS_CAS_MM_Status Error
    439       MM: state 0
    439       MM: TVP Probe P_UAS_CAS_MM_Status ErrorGMM: ResetSIM_Data
    439       GMM: No valid GSM-GPRS keys
    439       GMM: No valid WCDMA keysGAM:Status:11400D00 Ver:237 
    439       GAM:CPU:640 Ver:237 
    440       Prototype Start Process [File System Version Control]: OK (P7AS)
    440       Rational Rose RealTime C Target Run Time SystemRelease 6.50.C.00
    440       Copyright (c) 1993-2003 Rational Software
    441       ILD_HCITL.c: 308 Do_SYSCON_ConfigureSysClk: Status = 0 
    441       EILD_HCITL.c: 598 EILD_HCITL_SetTXPin: PinLevel = 0 
    442       SM: Initiated; ProcessID = 65667 !
    442       LOGGPOINT: RRC CellSel:  STATE DEACTIVATED  ***
    442       RRC_MeasCtrl: Deactivated.
    442       TASK: Init transition in MobilityCtrl cap
    t
    442       TASK: NO SERVING CELL in MobilityCtrl capsule
    443       BMC: BMC_Deactivated             = 1
    443       CAS Proxy: Process Id = 65670DRM: DRM_Process started
    444       * CC7 state 0
    444       * CC6 state 0
    444       * CC5 state 0
    444       * CC4 state 0
    444       * CC3 state 0
    444       * CC2 state 0
    444       * CC1 state 0
    444       M: MODULE_INIT
    444       GDFS_SRV State 1-Closed
    452       GDFS: Format version 1
    453       GDFS Log[0] <- Phys[0] 120266 bytes left. Erased     3 times
    453       GDFS Log[1] <- Phys[1]  97967 bytes left. Erased     3 times
    454       GDFS Log[2] <- Phys[2] 120714 bytes left. Erased     3 times
    455       GDFS Log[3] <- Phys[3] 126561 bytes left. Erased     3 times
    455       GDFS Log[4] <- Phys[4] 126572 bytes left. Erased     3 times
    455       GDFS Log[5] <- Phys[5] 127662 bytes left. Erased     3 times
    455       GDFS Log[6] <- Phys[6] 130378 bytes left. Erased     3 times
    458       GDFS_SRV State 2-Opening
    459       SetIpc_Receiver MAC called by Pid=65667
    459       SetIpc_Receiver RRC called by Pid=65667
    461       RH: Activate on LRRAT = 0
    461       RH state: Inactive
    461       CAS Proxy: <From CAS> RRC_TMSI_REMOVE_REQ
    461       CAS Proxy: <From CAS> RRC_DELETE_KEYS_REQ
    461       CAS Proxy: <From CAS> RRC_DELETE_KEYS_REQ
    461       CC: speech ver config 4 2 0 5 1
    461       RRC_MeasCtrl: RxLevReportingArray:2 14 23 31 39 92 0 0 0 255 
    462       TASK: Received RRC_TMSI_REMOVE_REQ from CAS.
    462       TASK: Received RRC_DELETE_KEYS_REQ from CAS.
    462       TASK: Received RRC_DELETE_KEYS_REQ from CAS.
    462       CC: TTY mode = 0
    462       * CC0 state 0
    462       RR Multislot class GPRS = 8
    462       RR state 0SS: State Idle @CallMeter startedSMC_MO_1 (65643) state 4
    463       SMC_MO_2 (65644) state 4
    463       SMC_MT (65645) state 4
    463       SMR_MO state 3
    463       SMR_MT state 3
    463       SetIpc_Receiver PHY_LogPointServer called by Pid=65673cp_flow_t : Entries= 26, Entry size= 212
    463       tcp_flow_lite_t : Entries= 26, Entry size= 32
    463       tpl_pcb_t : Entries= 26, Entry size= 128
    464       RTS INFO: Did NOT find the signal in the registered database. Sending process: IDBGSRV_Process(65707) Signal no: 41144 Receiving process:UMTS_L2_PT (65669)IrDA_ll.c:: IrLAP Nickname: Sony Ericss 
    465       IrDA_lap_rec.c: IrLAP process ready ! 
    465       IrDA_lmp_rec.c: IrLMP process ready ! 
    474       EILD_HCITL.c: 598 EILD_HCITL_SetTXPin: PinLevel = 1 
    474       EILD_HCITL.c: 747 SetBaudRate: = 115200, Stopbits = 1 
    474       BT/BT.c: Try_HCITL_StartService: Start event OK! 
    475       CCS: Idle
    475       SL: SearchingMode = 1ACM: Starting Application Side.
    475       SL: RAT_Mode = Dual mode
    475       ns_util: MS Features:2f13
    475       ns_util: CFG_ENABLE_WCDMA_CALL_SUPPORT
    475       ns_util: CFG_ENABLE_GSM_GPRS_CALL_SUPPORT
    475       SL: SIGID_INTERVAL_START_MOD_NS_CAS = 3885
    475       SL: ProcessID = 10064
    475       SL: CFG_DISABLE_SECURITY_HANDLING is NOT! defined
    475       SL: DUAL_RAT_SUPPORT IS! defined
    475       SL state 0
    476       SL<-EVENT_SIM_STATE_CHANGED in State 0 from 100c5
    476       SL: Not active
    476       SL new SIM handle=0RLink up and running
    490       ACM.StartMain: Starting First App. id=1...
    491       ACM.StartMain: Start of First App ok.
    491       AM: MODULE_INIT_READY
    491       
    491       
    491       ******************************************
    491       * Sony Ericsson Mobile Communications AB *
    491       * Copyright 2003                         *
    491       ******************************************
    491       * R1AB013     prgCXC1250046_EU_1_VI         *
    491       ******************************************
    491       
    491       CSM[H324]:  Turning on H324 state trace
    492       CSM[CCL]:  Turning off CCL state trace
    492       CSM[H245]:  Turning on H245 MSD state trace
    492       CSM[H245]:  Turning on H245 CE state trace
    492       CSM[H245]:  Turning on H245 MT state trace
    492       CSM[H245]:  Turning off H245 MT IF state trace
    492       CSM[H245]:  Turning off H245 RME state trace
    492       CSM[H245]:  Turning on H245 LC state trace
    492       CSM[H245]:  Turning off H245 LC Manager state trace
    492       CSM[H245]:  Turning off H245 CLC state trace
    492       CSM[H245]:  Turning off H245 RTD state trace
    492       CSM[H245]:  Turning off H245 MR state trace
    492       (OBEX/obex_session.c line: 2253) OBEX Started.
    493       RLP: process started
    493       L2RCOP: process started
    493       RLP: state changed to 'S0_ADMandDetached'
    493       L2RCOP: state changed to 'Initial'
    493       RTP_Ctrl started
    493       MMPROT[RTSP]: RTSP Process Started
    494       OS: core startup complete!
    507       AT process: Awake and AT your service!
    507       AT/SysInfo SYS_VENDOR_NAME: Sony Ericsson
    507       AT/SysInfo SYS_PRODUCT_NAME: Sony Ericsson Z800
    507       AT/SysInfo SYS_PRODUCT_VERSION: 0000
    507       AT/SysInfo SYS_SW_ID: 2005-04-29 17:44 ECSEKDA ld_violetta_crh109338_r7h_ec_iso U100_PHONE_WCDMA_4MBRAM
    507       AT/SysInfo SYS_SW_PRODUCT_ID: ld_violetta_crh109338_r7h_ec_iso U100_PHONE_WCDMA_4MBRAM
    507       AT/SysInfo SYS_SW_VERSION: ld_violetta_crh109338_r7h_ec_iso
    507       AT/SysInfo SYS_SW_VERSION_DATE: ld_violetta_crh109338_r7h_ec_iso
    507       AT/CEI_OnRS232_GetCapabilities: Warning !! The channel already destroyed, execution stopped: ClientTag = d!  
    533       MSG: msgmain.c: State 255
    546       GDFS_WR State 1-Closed
    547       GDFS_WR Start check
    554       I2C SW IRQ issued
    554       I2C Bus error
    679       I2C SW IRQ issued
    679       I2C Bus errorI2C: Unknown primitive 11087
    687       ###Downloading DSP for first time after startup of phone!###
    693       SYSPWR-BATT: SYSTEM_CUT_OFF_VOLTAGE reached by trigger: AD=0, AD_TX=255
    701       ## DSP VersionIdentity: "CRH109469_R4AG MIDI_PCM_ASR --- QCSBROE_4 Wed Feb 23 09:22:47 2005"
    702       PHY_MasterProcess: Temperature subscription success.[sysctrl] Enabling UICC refresh task.
    702       [SIM_FILE_UTIL] FCP Cache Size 80
    703       ETX OK
    704       MMM IMEI = 355991-00-285242-0, IMEI_SVN=12
    704       MMM EqPLMN List read from GDFS, nbr=1, 250 19 
    704       MMM: TVP Probe P_UAS_CAS_PLMN_List Error
    704       MMM state 0
    704       MMM MS_OperationMode=0
    705       DebugMux[IMEI] Length=8, TypeOfID=2, OddEven=1, Digits: 3 5 5 9 9 1 0 0 2
    711       [lockctrl] SimLock : NOT OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
    711       [lockctrl] SimLock : NOT OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
    711       [lockctrl] SimLock : NOT OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
    711       [lockctrl] SimLock : OK, PhoneLock : OK, Sim Active : NOT ACTIVE
    713       MPH: GSM Search Intervals 10 20 80 10 25 - 40 0 0 0 0
    713       MPH PacketChannels activated 
    713       MS_TYPE = MS_EGSM900_DCS1800_PCS1900
    714       MPH:SelectedModeIndex=1
    714       MPH_GD_Info.SensitivityLimit_dBm[BAND_GSM900_OR_EGSM900] = -107
    714       MPH_GD_Info.SensitivityLimit_dBm[BAND_DCS1800] = -107
    714       MPH_GD_Info.SensitivityLimit_dBm[BAND_PCS1900] = -107
    714       MPH_GD_Info.SensitivityLimit_dBm[BAND_GSM850] = -107
    714       MPH_GD_Info.MinNrOfIdentifiedCellsToSkipWeakCells = 0
    714       MPH: EGSM900_DCS1800
    720       [SIM-RDR] Fi: 1 Di: 1 Div1: 0 Div2: 0
    733       BATT: Battery type is UNKNOWN
    738       BATT: Measurements are 2813 mV and -150.0 mA
    738       BATT: Compensated VBAT (2850 mV) based remaining capacity is 0.0%
    751       [SIM-RDR] Fi: 1 Di: 1 Div1: 0 Div2: 0
    756       GVI:Ready
    770       [SIM] *** ERROR *** No Card Present
    770       [SIM] InitialiseCard SIM_APPLICATION_UNKNOWN
    770       [SIM] WARNING - Destruction of Application Parameters
    770       [SIM_FILE_UTIL] Used Cache Records 0
    771       [SIM_FILE_UTIL] Max Cache Records  80
    771       [SIM] WARNING - Destruction of Card Parameters
    771       [SIM] State Changed: SIM_STATE_POWER_OFF, Appl: 0, Ref: 0[lockctrl] SimLock : OK, PhoneLock : OK, Sim Active : NOT ACTIVE
    771       SL<-EVENT_SIM_STATE_CHANGED in State 0 from 100c5
    771       SL: Not active
    771       SL new SIM handle=0GDFS_Wrapper: **** Up and running ****
    824       MAPP: Error21 OnSrt
    824       MAPP: Error2
    824       MAPP: Error: Radio deactivation failed[sysctrl] System shut down
    829       DRM Init OK
    829       DRM_PRS_Process started
    835       GDFS Free Blk 7 Ok
    835       GDFS_WR Check done
    835       GDFS_SRV State 3-Open
    835       GDFS_WR State 2-Open*** PID started 65596. ***
    836       *** Test code: .... disabled. ***
    836       *** Runtime checks: disabled. ***
    836       *** Fatal errors: . enabled. ***
    836       *** Debug traces: . disabled. ***
    836       max timers 1
    1103      BT/HCI.c: HCI_RECEIVE_W_TMO: Timeout after 2000 ms 
    1228      BT/BT.c: 7670 BT_UART_Clock: ON 
    1461      [sysctrl] Closing Gdfs
    1461      WAP:Start (process id 0x1009D)
    1461      AM:MODULE_SHUTDOWN
    1462      WAP: File API Initiated
    1462      WAP: fileMkDir(.../msm)
    1464      WAP: created task 0
    1466      WAP: fileMkDir(.../stk)
    1466      WAP: fileMkDir(.../stk/tmp)
    1467      WAP: fileMkDir(.../stk/auth)
    1470      WAP: fileMkDir(.../stk/cookie)
    1473      WAP: created task 1
    1474      WAP: createTask failure for 2
    1479      283A6B4A .+ .!            00 2B 20 11 21                                  
    1483      BT/BT.c: 6269 HCI_Version = BT1.1, HCI_Revision = 0x008d 
    1483      BT/BT.c: 6306 LM_Version = R2C 
     Generated: 2003-11-05 14:05
     Comment: BbyDataSW_2LLP_EmulROM 1.1_sp01 
    1485      BT/BT.c: 6455 Download: patchfile_PCF87852_2A_s001_patchid_04.fdw, Size = 3912 
    1499       changed to state 0
    1500      PBS Process started
    1500      PBS: Dispatch PHB_NO_ACCESS[sysctrl] Preparing OS for shutdown
    1503      GDFS_SRV State 1-ClosedOS: core shutdown
    1505      GDFS_WR State 1-Closed
    1508      FS: 2 remove-not-closed files open
    1509      FS: File system partition / UNCLEANLY unmounted.
    1509      FS: File system partition /tpa/system/bg_images/cache unmounted.
    1511      FS: 2 remove-not-closed files open
    1512      FS: File system partition /ifs UNCLEANLY unmounted.
    1512      FS: File system partition /system unmounted.
    1512      FS: File system partition /smsdata unmounted.
    1530      FSFLASH: Pack Process stopped, pid = 0x10034.
    1530      FSFLASH: Erase Process stopped, pid = 0x10033.
    1531      FSFLASH: Write Process stopped, pid = 0x10032.OS: core shutdown complete!
    1531      [sysctrl] Get charger connection status 
    1531      [sysctrl] Powering off platform
    1532      [sysctrl] Deactivating Network Signalling
    1532      SL<-R_REQ_NSAD_DEACTIVATE in State 0 from 1003d
    1532      MMM state 17
    1532      MM: IsMM_Connected=0
    1532      MM: REG FAILED, Cause = DETACHED
    1532      GMM<-GMM_DEACTIVATE_REQ
    1532      GMM: TVP_GetTimerIndex no TVP timer
    1532      GMM: New TLLI distributed to RR: 0xffffffff (255, 255, 255, 255)
    1532      TLLI_PTMSI_New
    1532      case1 UnassBoth
    1533      CAS Proxy: <From CAS> RRC_PTMSI_REMOVE_REQ
    1533      TASK: Received RRC_PTMSI_REMOVE_REQ from CAS.
    1533      GMM: Reset combined procedures
    1533      GMM: REG FAILED, Cause = DETACHED
    1533      MMM HandleNOM: NOM_GSM->NOM_UNKNOWN, MS_Mode=1, ForcedFlag=0
    1533      CAS Proxy: <From CAS> RRC_DEACTIVATE_REQ
    1533      TASK:Deactivated: Sending deactivation to RRC Main.
    1533      RRC:RRC_cap:Deactivated: Received MAIN_DEACTIVATE_REQ.
    1533      WHAM: PHY_RESET_REQ
    1533      LOGGPOINT: RRC:RRC_cap:AwaitPhyReset: PHY_RESET_REQ sent.
    1533      PHY_MasterProcess: PHY_RESET_REQ received
    1534      WHAM_HW_ControlProcess: PHY_DOWNLOAD_REQ received
    1610      GVI Heap:ERROR Delete local heap without freeing all memory diff 29 allocations 
    1652      WHAM_HW_ControlProcess: Starting recurrent HSSL supervise timer of 15 s
    1652      WHAM_HW_ControlProcess: Code download all WANDA code sent
    1653      PHY_MasterProcess: PHY_OK_IND received
    1653      Wanda: Official Checkpoint, CNH1010240_R7Y020, Mon May 16 11:08:23 2005
    1653      WHAM: PHY_RESET_CNF
    1653      IPC_TX: PHY_INIT_REQ
    1903      RRC:RRC_cap:AwaitPhyInit,Timeout: No confirmation from PHY.
    1903      IPC_TX: PHY_INIT_REQ
    2153      RRC:RRC_cap:AwaitPhyInit,Timeout: No confirmation from PHY.
    Может кто подскажет - в какую сторону думать?
    18.08.2008, 21:20
    Ответить с цитированием
  • Новое
    Аватар для Raikkonenn

    Raikkonenn
    MCRF Инженер

    Сообщений:
    802
    Регистрация:
    07.09.2006
    Возраст:
    40
    Рейтинг мнений: 800
    Вес репутации: 439
    Raikkonenn Raikkonenn Raikkonenn Raikkonenn Raikkonenn Raikkonenn Raikkonenn Raikkonenn Raikkonenn Raikkonenn Raikkonenn
    Очки: 43,363, Уровень: 100 Очки: 43,363, Уровень: 100 Очки: 43,363, Уровень: 100
    Активность: 99% Активность: 99% Активность: 99%
    По умолчанию Re: Z800, белый экран при включении, не финализируется #2
    Попробуйте GDFS в SSW формате прошить ему.
    v800_gdfs_in_ssw_format.ssw
    После чего Unlock/Repair
    Потом Recovery - cid->current cid и прошить с комплитом.
    Если все равно комплит не пройдет - проверяйте железо.

    Последний раз редактировалось Raikkonenn; 20.08.2008 в 00:45.
    20.08.2008, 00:04
    Ответить с цитированием
  • Новое
    Аватар для IRoN

    IRoN
    Новичок

    Сообщений:
    14
    Регистрация:
    18.07.2007
    Возраст:
    39
    Рейтинг мнений:
    Вес репутации: 0
    IRoN
    Очки: 3,117, Уровень: 34 Очки: 3,117, Уровень: 34 Очки: 3,117, Уровень: 34
    Активность: 0% Активность: 0% Активность: 0%
    По умолчанию Re: Z800, белый экран при включении, не финализируется #3
    Цитата:
    Сообщение от Raikkonenn Посмотреть сообщение
    Если все равно комплит не пройдет - проверяйте железо.
    Прошил по совету полностью, не помогло.
    Пожалуста подскажите, что стоит проверить по железу (проц и память уже реболил, не помогает, поменять донора пока нет)
    21.08.2008, 12:06
    Ответить с цитированием
Ответ


Здесь присутствуют: 1 (пользователей: 0 , гостей: 1)
 

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход

Похожие темы
Тема Автор Раздел Ответов Последнее сообщение
3310 находит и теряет сеть при включении Acid Nokia DCT-3, DCT-L 21 09.04.2006 23:03


Текущее время: 00:25. Часовой пояс GMT +3.