Reading Phone Info....
Connected phone -    Nokia E52-1
Software ver : V ICPR82_11w16.3.11 29-03-12 RM-469 (c) Nokia
IMEI    :      35521603ххххххх
Ape Ver :      091.003
APE Var :      091.003091.003.05.01091.003.C00.01
APE ADSP:      256
DSP Ver :      11w52
APE Test:      v0.a091
PPM     :      
CNT     :      
Product SN   :     0
Product code :     
Long Prod.SN :     0
Hardware info=======
HWID  : 
Retu  : 40
Tahvo : 00
Batery: 3989 mV
APE HW: 256
Lock info ===========
IMEI       : 355216хххххххх
IMEI spNet : 3A 55 12 06 ххххх
IMEI svNet : 33 55 12 06 ххххх
Unable to read Lock table... :(
CRT308 Backup Created
SDD key status : Ok
CMLA Key status : Not Present
SimLock status : Damaged!!!!!
Security status : Damaged!!!!!
PA_SL3 phone ,  SP_CODE_LEN : 15
User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method 
Done!
Will Write RPL keys now...
Check RPL file...
SimLock Data found!
SimLock key found!
-> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus
Writing SimLock Key...   Error!
Writing SimLock Data...  Error!
SDD Key status : SD Data is Ok
SimLock status : SimLock Damaged!!!!! :(
Security status : Security Damaged!!!!! :(
 
Done!
 
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info...  - Ok
Phone disconected!
Connect phone on selected interface...
UFS S/N хххххх boot - Ok
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info...  - Ok
Will Write RPL keys now...
Check RPL file...
SimLock Data found!
SimLock key found!
No any FLASH keys detected, Skip FLASH part
Init Service mode... Wait...

Writing SimLock Key...   Error!
Writing SimLock Data...  Error!
SDD Key status : SD Data is Ok
SimLock status : SimLock Damaged!!!!! :(
Security status : Security Damaged!!!!! :(

Done!

Connect phone on selected interface... 

 Phone found! 
 Series 60 Device detected! 
 read info...  - Ok 

 Reading Phone Info.... 
 Connected phone -    Nokia E52-1 
 Software ver : V ICPR82_11w16.3.11 29-03-12 RM-469 (c) Nokia 
 IMEI    :      355216xxxxxxxxx 
 Ape Ver :      091.003 
 APE Var :      091.003091.003.05.01091.003.C00.01 
 APE ADSP:      256 
 DSP Ver :      11w52 
 APE Test:      v0.a091 
 PPM     :       
 CNT     :       
 Product SN   :     0 
 Product code :     0591676 
 Long Prod.SN :     0 
 Hardware info======= 
 HWID  :  
 Retu  : 40 
 Tahvo : 00 
 Batery: 4095 mV 
 APE HW: 256 
 Lock info =========== 
 IMEI       : 355216xxxxxxxxx 
 IMEI spNet : 3A 55 12 06 xxxxxxxx  
 IMEI svNet : 33 55 12 06 xxxxxxxx  

 Unable to read Lock table... :( 
 CRT308 Backup Created 

 SDD key status : Ok 
 CMLA Key status : Not Present 
 SimLock status : Damaged!!!!! 
 Security status : Ok 
 PA_SL30 phone ,  SP_CODE_LEN : 20  

 User code : Crypted 
 UserDataExLevel : Low [Gallery] , FullFlash method  

 Done! 

 Will Write RPL keys now... 
 Check RPL file... 
 SimLock Data found! 
 SimLock key found! 
 -> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus 

 Writing SimLock Key...   Error! 
 Writing SimLock Data...  Error! 

 SDD Key status : SD Data is Ok 
 SimLock status : SimLock Damaged!!!!! :( 
 Security status : Security is Ok 


 Done! 

 Connect phone on selected interface... 

 Phone found! 
 Series 60 Device detected! 
 read info...  - Ok

NPC Certificate saved...
RPL saved : D:\InfinityBox\Best\Backup\Cert\35521603xxxxxx_CRT_2nd.rpl
Get secure data...
ID_INFO : ICPR82_11w16.3/19-05-11/RM-469
Initial check ok, but need more complex
- > Please, send SPR file to [email protected] for further checking!
- > With this ticket : 02056B90
- > ETA time can be between 2-3 days. If no answer - no wait it.

Up****** SIMLOCK(PA_SL3)...error 0x17
Trying to write SIMLOCK as PM(PA_SL3)...OK
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 6], SN: C080A0DC
Using device: HTI, FW ver: 00.50, SN: 0000E67D
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0 
Module ver: 1.0.0.21200(18-07-2012), Library ver: 1.0.0.14205(18-07-2012)
CMT Data :
SYSTEM ASIC ID: 000000030000022600010007600C192102011104 [RAPUYAMA ver: 1.1]
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 14600202DD300E4998194EE8B3BB1C32189F0505
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 12.14.0 revision: 3.0 size: 0x3B40
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT 
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT 
Storage2: 0020 0040 - 0000 0031 [ST NAND KAT00F00RA] type: FLASH,NOR, asic:CMT 
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage4: 0020 0040 - 0000 0031 [ST NAND KAT00F00RA] type: FLASH,MuxOneNAND, asic:CMT 
Suggested algorithm: XSR 1.6
Algorithm: RAPUv11_XSR17_alg.fg [XSR 1.6] version: 12.14.0 revision: 3.0 size: 0xD4569
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
TransmissionMode: DDR&TX2
FUR: Adding Asic CMT as client OK
CMT PAPUBKEYS HASH: 85F252E351E225CAFC4DFBC8041EABD2823E3500
Erasing CMT NPC ... OK
Up****** CMT NPC ...OK
Erasing CMT CCC ... OK
Up****** CMT CCC ...OK
Erasing CMT HWC ... OK
Up****** CMT HWC ...OK
Prog.status for Asic CMT ...
NAND: OK
 
Phone type: RM-469 (Nokia E52-1)
SW version: V ICPR82_11w16.3.11 29-03-12 RM-469 (c) Nokia 
ApeCoreSw: 091.003
Imei plain: 35521603xxxxxx-0
Battery voltage: 4562 mV, current: 0 mA
Language Pack:
- not available.
SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !

SIMLOCK invalid!
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST failed!
SECURITY_TEST failed!

 
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!