Последние файлы
Наши партнеры
Важная информация
Решено N8, [rm-596] висит на заставке после процедуры erase flash
Nokia BB5 - 6630, 6680, 6681 ...
Закрытая тема
 
Опции темы
  • Новое
    Аватар для Alva

    Alva
    MCRF Инженер

    Сообщений:
    3,895
    Регистрация:
    30.07.2006
    Возраст:
    44
    Рейтинг мнений: 1330
    Вес репутации: 524
    Alva Alva Alva Alva Alva Alva Alva Alva Alva Alva Alva
    Очки: 102,778, Уровень: 100 Очки: 102,778, Уровень: 100 Очки: 102,778, Уровень: 100
    Активность: 20% Активность: 20% Активность: 20%
    По умолчанию N8, [rm-596] висит на заставке после процедуры erase flash #1
    Скрытый текст (вы должны войти под своим логином или зарегистрироваться и иметь 1 сообщение(ий)):
    У вас нет прав чтобы видеть скрытый текст, содержащейся здесь.
    05.09.2012, 21:56
  • Новое
    Аватар для Gatin

    Gatin
    Уставший

    Сообщений:
    1,767
    Регистрация:
    20.10.2005
    Возраст:
    41
    Рейтинг мнений: 1315
    Вес репутации: 389
    Gatin Gatin Gatin Gatin Gatin Gatin Gatin Gatin Gatin Gatin Gatin
    Очки: 41,035, Уровень: 100 Очки: 41,035, Уровень: 100 Очки: 41,035, Уровень: 100
    Активность: 99% Активность: 99% Активность: 99%
    По умолчанию Re: N8, [rm-596] висит на заставке после процедуры erase flash #2
    было такое с C6 только откат на Anna дал результат.
    Код:
    Connect phone on selected interface...
    
    Phone found!
    Series 60 Device detected!
    read info...  - Ok
    
    Reading Phone Info....
    Connected phone -    Nokia C6-01
    Software ver : V 79_sr1_11w42.5 25-11-11 RM-601 (c) Nokia
    IMEI    :      358627048165557
    Ape Ver :      111.030.0609
    APE Var :      111.030.0609111.030.0609.04.01111.030.0609.C00.01
    APE ADSP:      256
    DSP Ver :      79_SR1_11w42.5
    APE Test:      0.064
    PPM     :      
    CNT     :      
    Product SN   :     0
    Product code :     059C3X9
    Long Prod.SN :     0
    Hardware info=======
    HWID  : 
    Retu  : 40
    Tahvo : 00
    Batery: 4017 mV
    APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
    APE HW: 256
    Lock info ===========
    IMEI       : 358627048165557
    IMEI spNet : 3A 85 26 07 84 61 55 05 
    IMEI svNet : 33 85 26 07 84 61 55 35 F3 
    
    Conf key     : 0000000000000000
    Provider key : 2440700000000000
    Provider    : AT&T;U.S.A. (3650)
    Counters   : Key 0  [3] , Fbus 0  [10]
    Blocks      : 7
    
    LOCK STATUS :
    =============================
    BLK : 1
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 2
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 3
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 4
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 5
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 6
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 7
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    =============================
    LOCKS :  All Open
    =============================
    CRT308 Backup Created
    
    SDD key status : Ok
    SimLock status : Ok
    Security status : Ok
    PA_SL3 phone ,  SP_CODE_LEN : 15
    
    User code : Crypted
    UserDataExLevel : Low [Gallery] , FullFlash method 
    
    Done!
    
    Phone disconected!
    
    Connect phone on selected interface...
    
    Core : v1.47 , FlashEngine : v1.5
    
    Selected FlashSettings : FullFlash
    Check FlashFiles, Please, wait...
    
    Files Set for Flashing :
    MCU : RM-718_111.030.0609_79u_prd.core.fpsx
    PPM : RM-718_111.030.0609_04.01_Russian_79u_prd.rofs2.fpsx
    PPM2 : RM-718_111.030.0609_C00.01_79u_prd.rofs3.fpsx
    CNT : RM-718_111.030.0609_U01.01_79u.uda.fpsx
    APE : RM601_APE_ONLY_ENO_11w32_v0.064.fpsx
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Dead mode selected
    Dead Mode is Selected
    Waiting for USB device...
    --- Insert cable and charger or press phone's power button! ---
    Connection opened successfully
    Waiting for communication response...
    BootRom : 1st boot ok
    ASIC ID:       000000030000022600010007600C192102031104
    CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
    EM0 ID:        00001040
    EM1 ID:        00001030
    PUBLIC ID:     10700003E1DD03442279BA2BC05685F65169FB36
    ASIC MODE ID:  00
    ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
    ROM ID:        E693EF0DAC22615B
    Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
    Processing RAWLOADER...
    FLIC : 00680020
    Req : XSR 1.6
    Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
    Processing PASUBTOC ...
    Processing ALG ...
    Boot Done! :)
    TIME : Boot time : 00:00:02 
    Reopening the connection...
    Waiting for response: 30
    ADL: Check mode
    Select ASIC [C900]
    PAPUBkeys : C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02
    ADL: phone is in flash mode
    
    Backup enabled, will read all certificates...
    Reading NPC certificate...
    IMEI : 358627048165557
    Reading CCC certificate...
    Reading HWC certificate...
    Reading R&D certificate...
    Reading VARIANT certificate...
    Reading PARTNERC certificate...
    Reading MDM_KEYS certificate...
    Cert Read done!
    
    NPC Certificate saved...
    CCC Certificate saved...
    HWC Certificate saved...
    
    RPL saved : c:\InfinityBox\BEST\Backup\Cert\358627048165557_CRT_2nd.rpl
    
       ===Flashing [MCU]===
    Erase : Processing RM-718_111.030.0609_79u_prd.core.fpsx
    Partitioning....
    Partitioning Ok...
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:06 
    Write : Processing RM-718_111.030.0609_79u_prd.core.fpsx
    CMT: Writing Hash CERT [ADA]
    CMT: Writing Hash CERT [KEYS]
    CMT: Writing Hash CERT [PRIMAPP]
    CMT: Writing Hash CERT [RAP3NAND]
    CMT: Writing Hash CERT [SOS+PMML]
    CMT: Writing Hash CERT [SOS+DECOMP]
    CMT: Writing Hash CERT [PASUBTOC]
    CMT: Writing Hash CERT [PAPUBKEYS]
    CMT: Writing Hash CERT [GENIO_INIT]
    CMT: Writing Hash CERT [SOS+IVE3A]
    CMT: Writing Hash CERT [SOS*UPDAPP]
    CMT: Writing Hash CERT [SOS*DSP0]
    CMT: Writing Hash CERT [LDSP]
    CMT: Writing Hash CERT [SOS*ISASW]
    CMT: Writing Hash CERT [SOS+CORE]
    CMT: Writing Hash CERT [SOS+ROFS1]
    Total writen 504 blocks
    TIME : Write time : 00:00:18 
    MCU Write done
    ADL: Request programm status
    NAND status : 00000006 / 00000006 / 00000000
    
       ===Flashing [PPM]===
    Erase : Processing RM-718_111.030.0609_04.01_Russian_79u_prd.rofs2.fpsx
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00 
    Write : Processing RM-718_111.030.0609_04.01_Russian_79u_prd.rofs2.fpsx
    CMT: Writing Hash CERT [SOS+ROFS2]
    Total writen 213 blocks
    TIME : Write time : 00:00:07 
    PPM Write done
    ADL: Request programm status
    NAND status : 00000006 / 00000006 / 00000000
    
       ===Flashing [PPM2]===
    Erase : Processing RM-718_111.030.0609_C00.01_79u_prd.rofs3.fpsx
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00 
    Write : Processing RM-718_111.030.0609_C00.01_79u_prd.rofs3.fpsx
    CMT: Writing Hash CERT [SOS+ROFS3]
    CMT: Writing Hash CERT [SOS+IVE3B]
    Total writen 4 blocks
    TIME : Write time : 00:00:00 
    PPM Write done
    ADL: Request programm status
    NAND status : 00000006 / 00000006 / 00000000
    
       ===Flashing [CNT]===
    Erase : Processing RM-718_111.030.0609_U01.01_79u.uda.fpsx
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:06 
    Write : Processing RM-718_111.030.0609_U01.01_79u.uda.fpsx
    Total writen 563 blocks
    TIME : Write time : 00:00:21 
    CNT Write done
    ADL: Request programm status
    NAND status : 00000006 / 00000006 / 00000000
    
       ===Flashing [APE]===
    Erase : Processing RM601_APE_ONLY_ENO_11w32_v0.064.fpsx
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00 
    Write : Processing RM601_APE_ONLY_ENO_11w32_v0.064.fpsx
    CMT: Writing Hash CERT [SOS*ENO]
    Total writen 21 blocks
    TIME : Write time : 00:00:00 
    APE Write done
    ADL: Request programm status
    NAND status : 00000006 / 00000006 / 00000000
    
    ADL: Close_Session
    Content: 000300000000060000000600000000
    ADL: Reboot
    
    Flashing done!
    Total flash time : 00:01:03
    Reboot phone now...
    
    Reading Phone Info....
    Connected phone -   Nokia C6-01
    Software Info:     V 79_sr1_11w42.5 25-11-11 RM-601 (c) Nokia
    IMEI:  358627048165557
    Ape Version: 111.030.0609
    Product code:  059C3X9
    Checking...
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    Read Info Done!
    Settings After Flash Defaults...
    ProductTuneSet...OK!
    SwUpgradeSet...OK!
    Product code update...
    Set phone to Normal mode...
    
    AfterFlash operations done ;D
    Done!
    
    Elapsed: 00:01:27
    Connect phone on selected interface...
    
    User ACCEPTED FULL ERASE
    Dead Mode is Selected
    Waiting for USB device...
    --- Insert cable and charger or press phone's power button! ---
    Connection opened successfully
    Waiting for communication response...
    BootRom : 1st boot ok
    ASIC ID:       000000030000022600010007600C192102031104
    CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
    EM0 ID:        00001040
    EM1 ID:        00001030
    PUBLIC ID:     10700003E1DD03442279BA2BC05685F65169FB36
    ASIC MODE ID:  00
    ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
    ROM ID:        E693EF0DAC22615B
    Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
    Processing RAWLOADER...
    FLIC : 00680020
    Req : XSR 1.6
    Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
    Processing PASUBTOC ...
    Processing ALG ...
    Boot Done! :)
    TIME : Boot time : 00:00:02 
    
    - > Backup check skipped by user
    
    Reopening the connection...
    Waiting for response: 30
    ADL: Check mode
    Select ASIC [C900]
    PAPUBkeys : C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02
    
    Reading NPC certificate...
    IMEI : 358627048165557
    Reading CCC certificate...
    Reading HWC certificate...
    Reading R&D certificate...
    Reading VARIANT certificate...
    Reading PARTNERC certificate...
    Reading MDM_KEYS certificate...
    Cert Read done!
    
    NPC Certificate saved...
    CCC Certificate saved...
    HWC Certificate saved...
    
    RPL saved : c:\InfinityBox\BEST\Backup\Cert\358627048165557_CRT_2nd.rpl
    
    
    ADL: Preparing for erase...
    
    Full Erase started...
    Asic : CMT , Sub : NAND
    Erase Area 0x00000000-0x3FFFFFFF
    Erasing Ok , [0F]
    Erase done , time : 00:00:13 
    
    ADL: Erase done
    
    ADL: Close_Session
    Content: 000205000000000000FFFF00000000
    ADL: Reboot
    Phone disconected!
    
    Connect phone on selected interface...
    
    Core : v1.47 , FlashEngine : v1.5
    
    Selected FlashSettings : FullFlash
    Check FlashFiles, Please, wait...
    
    Files Set for Flashing :
    MCU : RM-718_111.030.0609_79u_prd.core.fpsx
    PPM : RM-718_111.030.0609_04.01_Russian_79u_prd.rofs2.fpsx
    PPM2 : RM-718_111.030.0609_C00.01_79u_prd.rofs3.fpsx
    CNT : RM-718_111.030.0609_U01.01_79u.uda.fpsx
    APE : RM601_APE_ONLY_ENO_11w32_v0.064.fpsx
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Dead mode selected
    Dead Mode is Selected
    Waiting for USB device...
    --- Insert cable and charger or press phone's power button! ---
    Connection opened successfully
    Waiting for communication response...
    BootRom : 1st boot ok
    ASIC ID:       000000030000022600010007600C192102031104
    CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
    EM0 ID:        00001040
    EM1 ID:        00001030
    PUBLIC ID:     10700003E1DD03442279BA2BC05685F65169FB36
    ASIC MODE ID:  00
    ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
    ROM ID:        E693EF0DAC22615B
    Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
    Processing RAWLOADER...
    FLIC : 00680020
    Req : XSR 1.6
    Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
    Processing PASUBTOC ...
    Processing ALG ...
    Boot Done! :)
    TIME : Boot time : 00:00:02 
    Reopening the connection...
    Waiting for response: 30
    Waiting for response: 29
    ADL: Check mode
    Select ASIC [C900]
    PAPUBkeys : blank (Erased or HW failure)
    ADL: phone is in flash mode
    
    Backup enabled, will read all certificates...
    Reading NPC certificate...
    Reading CCC certificate...
    Reading HWC certificate...
    Reading R&D certificate...
    Reading VARIANT certificate...
    Reading PARTNERC certificate...
    Reading MDM_KEYS certificate...
     - > No any CRT data (MCU damaged/CERT erased), skip saving
    
       ===Flashing [MCU]===
    Erase : Processing RM-718_111.030.0609_79u_prd.core.fpsx
    Partitioning....
    Partitioning Ok...
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:04 
    Write : Processing RM-718_111.030.0609_79u_prd.core.fpsx
    CMT: Writing Hash CERT [ADA]
    CMT: Writing Hash CERT [KEYS]
    CMT: Writing Hash CERT [PRIMAPP]
    CMT: Writing Hash CERT [RAP3NAND]
    CMT: Writing Hash CERT [SOS+PMML]
    CMT: Writing Hash CERT [SOS+DECOMP]
    CMT: Writing Hash CERT [PASUBTOC]
    CMT: Writing Hash CERT [PAPUBKEYS]
    CMT: Writing Hash CERT [GENIO_INIT]
    CMT: Writing Hash CERT [SOS+IVE3A]
    CMT: Writing Hash CERT [SOS*UPDAPP]
    CMT: Writing Hash CERT [SOS*DSP0]
    CMT: Writing Hash CERT [LDSP]
    CMT: Writing Hash CERT [SOS*ISASW]
    CMT: Writing Hash CERT [SOS+CORE]
    CMT: Writing Hash CERT [SOS+ROFS1]
    Total writen 504 blocks
    TIME : Write time : 00:00:18 
    MCU Write done
    ADL: Request programm status
    NAND status : 00000006 / 00000006 / 00000000
    
       ===Flashing [PPM]===
    Erase : Processing RM-718_111.030.0609_04.01_Russian_79u_prd.rofs2.fpsx
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00 
    Write : Processing RM-718_111.030.0609_04.01_Russian_79u_prd.rofs2.fpsx
    CMT: Writing Hash CERT [SOS+ROFS2]
    Total writen 213 blocks
    TIME : Write time : 00:00:07 
    PPM Write done
    ADL: Request programm status
    NAND status : 00000006 / 00000006 / 00000000
    
       ===Flashing [PPM2]===
    Erase : Processing RM-718_111.030.0609_C00.01_79u_prd.rofs3.fpsx
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00 
    Write : Processing RM-718_111.030.0609_C00.01_79u_prd.rofs3.fpsx
    CMT: Writing Hash CERT [SOS+ROFS3]
    CMT: Writing Hash CERT [SOS+IVE3B]
    Total writen 4 blocks
    TIME : Write time : 00:00:00 
    PPM Write done
    ADL: Request programm status
    NAND status : 00000006 / 00000006 / 00000000
    
       ===Flashing [CNT]===
    Erase : Processing RM-718_111.030.0609_U01.01_79u.uda.fpsx
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:04 
    Write : Processing RM-718_111.030.0609_U01.01_79u.uda.fpsx
    Total writen 563 blocks
    TIME : Write time : 00:00:21 
    CNT Write done
    ADL: Request programm status
    NAND status : 00000006 / 00000006 / 00000000
    
       ===Flashing [APE]===
    Erase : Processing RM601_APE_ONLY_ENO_11w32_v0.064.fpsx
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00 
    Write : Processing RM601_APE_ONLY_ENO_11w32_v0.064.fpsx
    CMT: Writing Hash CERT [SOS*ENO]
    Total writen 21 blocks
    TIME : Write time : 00:00:00 
    APE Write done
    ADL: Request programm status
    NAND status : 00000006 / 00000006 / 00000000
    
    ADL: Close_Session
    Content: 000300000000060000000600000000
    ADL: Reboot
    
    Flashing done!
    Total flash time : 00:00:57
    Reboot phone now...
    
    Reading Phone Info....
    Connected phone -   Nokia C6-01
    Software Info:     V 79_sr1_11w42.5 25-11-11 RM-601 (c) Nokia
    IMEI:  12345610654321?
    Ape Version: 111.030.0609
    Product code:  
    Checking...
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    Read Info Done!
    Settings After Flash Defaults...
    ProductTuneSet...OK!
    SwUpgradeSet...OK!
    Product code update...
    Set phone to Normal mode...
    
    AfterFlash operations done ;D
    Done!
    
    Elapsed: 00:01:21
    Connect phone on selected interface...
    
    User ACCEPTED FULL ERASE
    Dead Mode is Selected
    Waiting for USB device...
    --- Insert cable and charger or press phone's power button! ---
    Connection opened successfully
    Waiting for communication response...
    BootRom : 1st boot ok
    ASIC ID:       000000030000022600010007600C192102031104
    CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
    EM0 ID:        00001040
    EM1 ID:        00001030
    PUBLIC ID:     10700003E1DD03442279BA2BC05685F65169FB36
    ASIC MODE ID:  00
    ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
    ROM ID:        E693EF0DAC22615B
    Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
    Processing RAWLOADER...
    FLIC : 00680020
    Req : XSR 1.6
    Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
    Processing PASUBTOC ...
    Processing ALG ...
    Boot Done! :)
    TIME : Boot time : 00:00:02 
    
    - > Backup check skipped by user
    
    Reopening the connection...
    Waiting for response: 30
    ADL: Check mode
    Select ASIC [C900]
    PAPUBkeys : C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02
    
    Reading NPC certificate...
    IMEI : 000000000000000
    Reading CCC certificate...
    Reading HWC certificate...
    Reading R&D certificate...
    Reading VARIANT certificate...
    Reading PARTNERC certificate...
    Reading MDM_KEYS certificate...
    Cert Read done!
    
    
    ADL: Preparing for erase...
    
    Full Erase started...
    Asic : CMT , Sub : NAND
    Erase Area 0x00000000-0x3FFFFFFF
    Erasing Ok , [0F]
    Erase done , time : 00:00:13 
    
    ADL: Erase done
    
    ADL: Close_Session
    Content: 000205000000000000FFFF00000000
    ADL: Reboot
    Phone disconected!
    
    Connect phone on selected interface...
    
    Core : v1.47 , FlashEngine : v1.5
    
    Selected FlashSettings : FullFlash
    Check FlashFiles, Please, wait...
    
    Files Set for Flashing :
    MCU : RM-718_022.014_79.92_prd.core.fpsx
    PPM : RM-718_022.014_04.01_Russian_79.92_prd.rofs2.fpsx
    PPM2 : RM-718_022.014_00.01_79.92_prd.rofs3.fpsx
    CNT : RM-718_022.014_01.01_79.92.uda.fpsx
    APE : RM601_APE_ONLY_ENO_11wk15_PS2_v0.063.fpsx
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Dead mode selected
    Dead Mode is Selected
    Waiting for USB device...
    --- Insert cable and charger or press phone's power button! ---
    Connection opened successfully
    Waiting for communication response...
    BootRom : 1st boot ok
    ASIC ID:       000000030000022600010007600C192102031104
    CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
    EM0 ID:        00001040
    EM1 ID:        00001030
    PUBLIC ID:     10700003E1DD03442279BA2BC05685F65169FB36
    ASIC MODE ID:  00
    ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
    ROM ID:        E693EF0DAC22615B
    Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
    Processing RAWLOADER...
    FLIC : 00680020
    Req : XSR 1.6
    Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
    Processing PASUBTOC ...
    Processing ALG ...
    Boot Done! :)
    TIME : Boot time : 00:00:02 
    Reopening the connection...
    Waiting for response: 30
    Waiting for response: 29
    ADL: Check mode
    Select ASIC [C900]
    PAPUBkeys : blank (Erased or HW failure)
    ADL: phone is in flash mode
    
    Backup enabled, will read all certificates...
    Reading NPC certificate...
    Reading CCC certificate...
    Reading HWC certificate...
    Reading R&D certificate...
    Reading VARIANT certificate...
    Reading PARTNERC certificate...
    Reading MDM_KEYS certificate...
     - > No any CRT data (MCU damaged/CERT erased), skip saving
    
       ===Flashing [MCU]===
    Erase : Processing RM-718_022.014_79.92_prd.core.fpsx
    Partitioning....
    Partitioning Ok...
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:04 
    Write : Processing RM-718_022.014_79.92_prd.core.fpsx
    CMT: Writing Hash CERT [ADA]
    CMT: Writing Hash CERT [KEYS]
    CMT: Writing Hash CERT [PRIMAPP]
    CMT: Writing Hash CERT [RAP3NAND]
    CMT: Writing Hash CERT [SOS+PMML]
    CMT: Writing Hash CERT [PASUBTOC]
    CMT: Writing Hash CERT [PAPUBKEYS]
    CMT: Writing Hash CERT [GENIO_INIT]
    CMT: Writing Hash CERT [SOS*UPDAPP]
    CMT: Writing Hash CERT [SOS*DSP0]
    CMT: Writing Hash CERT [LDSP]
    CMT: Writing Hash CERT [SOS*ISASW]
    CMT: Writing Hash CERT [SOS+CORE]
    CMT: Writing Hash CERT [SOS+ROFS1]
    Total writen 457 blocks
    TIME : Write time : 00:00:16 
    MCU Write done
    ADL: Request programm status
    NAND status : 00000006 / 00000006 / 00000000
    
       ===Flashing [PPM]===
    Erase : Processing RM-718_022.014_04.01_Russian_79.92_prd.rofs2.fpsx
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00 
    Write : Processing RM-718_022.014_04.01_Russian_79.92_prd.rofs2.fpsx
    CMT: Writing Hash CERT [SOS+ROFS2]
    Total writen 193 blocks
    TIME : Write time : 00:00:07 
    PPM Write done
    ADL: Request programm status
    NAND status : 00000006 / 00000006 / 00000000
    
       ===Flashing [PPM2]===
    Erase : Processing RM-718_022.014_00.01_79.92_prd.rofs3.fpsx
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00 
    Write : Processing RM-718_022.014_00.01_79.92_prd.rofs3.fpsx
    CMT: Writing Hash CERT [SOS+ROFS3]
    Total writen 2 blocks
    TIME : Write time : 00:00:00 
    PPM Write done
    ADL: Request programm status
    NAND status : 00000006 / 00000006 / 00000000
    
       ===Flashing [CNT]===
    Erase : Processing RM-718_022.014_01.01_79.92.uda.fpsx
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:04 
    Write : Processing RM-718_022.014_01.01_79.92.uda.fpsx
    Total writen 529 blocks
    TIME : Write time : 00:00:20 
    CNT Write done
    ADL: Request programm status
    NAND status : 00000006 / 00000006 / 00000000
    
       ===Flashing [APE]===
    Erase : Processing RM601_APE_ONLY_ENO_11wk15_PS2_v0.063.fpsx
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00 
    Write : Processing RM601_APE_ONLY_ENO_11wk15_PS2_v0.063.fpsx
    CMT: Writing Hash CERT [SOS*ENO]
    Total writen 20 blocks
    TIME : Write time : 00:00:00 
    APE Write done
    ADL: Request programm status
    NAND status : 00000006 / 00000006 / 00000000
    
    ADL: Close_Session
    Content: 000300000000060000000600000000
    ADL: Reboot
    
    Flashing done!
    Total flash time : 00:00:54
    Reboot phone now...
    
    Reading Phone Info....
    Connected phone -   Nokia C6-01
    Software Info:     V 92_11w25.1 01-07-11 RM-601 (c) Nokia
    IMEI:  12345610654321?
    Ape Version: 022.014
    Product code:  
    Checking...
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    Read Info Done!
    Settings After Flash Defaults...
    ProductTuneSet...OK!
    SwUpgradeSet...OK!
    Product code update...
    Set phone to Normal mode...
    
    AfterFlash operations done ;D
    Done!
    
    Elapsed: 00:01:15
    Connect phone on selected interface...
    
    Phone found!
    Series 60 Device detected!
    read info...  - Ok
    
    Reading Phone Info....
    Connected phone -    Nokia C6-01
    Software ver : V 92_11w25.1 01-07-11 RM-601 (c) Nokia
    IMEI    :      12345610654321?
    Ape Ver :      022.014
    APE Var :      022.014022.014.04.01022.014.00.01
    APE ADSP:      256
    DSP Ver :      92_11w25
    APE Test:      0.063
    PPM     :      
    CNT     :      
    Product SN   :     0
    Product code :     
    Long Prod.SN :     0
    Hardware info=======
    HWID  : 
    Retu  : 40
    Tahvo : 00
    Batery: 4171 mV
    APE BT: HCI Version 20 (rev. 64). LMP Version 44 (rev. 64). Manufacturer 2016.
    APE HW: 256
    Lock info ===========
    IMEI       : 12345610654321?
    IMEI spNet : 1A 32 54 16 60 45 23 01 
    IMEI svNet : 13 32 54 16 60 45 23 11 F8 
    
    Unable to read Lock table... :(
    
    IMEI DAMAGED!!! CRT308 save skipped... :(
    
    SDD key status : Damaged!!!!!
    SimLock status : Ok
    Security status : Ok
    PA_SL phone
    
    User code : Crypted
    UserDataExLevel : Low [Gallery] , FullFlash method 
    
    Done!
    
    Will Write RPL keys now...
    Check RPL file...
    NPC Data found! (CMT)
    CCC Data found! (CMT)
    HWC Data found! (CMT)
    -> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus
    
    Done!
    
    Connect phone on selected interface...
    
    Will Write RPL keys now...
    Check RPL file...
    NPC Data found! (CMT)
    CCC Data found! (CMT)
    HWC Data found! (CMT)
    Dead Mode is Selected
    Waiting for USB device...
    --- Insert cable and charger or press phone's power button! ---
    Connection opened successfully
    Waiting for communication response...
    BootRom : 1st boot ok
    ASIC ID:       000000030000022600010007600C192102031104
    CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
    EM0 ID:        00001040
    EM1 ID:        00001030
    PUBLIC ID:     10700003E1DD03442279BA2BC05685F65169FB36
    ASIC MODE ID:  00
    ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
    ROM ID:        E693EF0DAC22615B
    Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
    Processing RAWLOADER...
    FLIC : 00680020
    Req : XSR 1.6
    Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
    Processing PASUBTOC ...
    Processing ALG ...
    Boot Done! :)
    TIME : Boot time : 00:00:03 
    Reopening the connection...
    Waiting for response: 30
    ADL: Check mode
    Select ASIC [C900]
    PAPUBkeys : C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02
    ADL: Preparing for write certificates...
    
    Erase NPC... Ok
    Writing NPC... Ok
    Erase CCC... Ok
    Writing CCC... Ok
    Erase HWC... Ok
    Writing HWC... Ok
    
    ADL: Writing Flash certs done! :)
    
    ADL: Close_Session
    Content: 000300000000060000000600000000
    ADL: Reboot
    
    -> No any Flex keys selected, skip flex part
    
    Done!
    
    Phone disconected!
    
    Connect phone on selected interface...
    
    Phone found!
    Series 60 Device detected!
    read info...  - Ok
    
    Will Write RPL keys now...
    Check RPL file...
    SimLock Data found!
    SimLock key found!
    -> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus
    
    Writing SimLock Key...   Ok!
    Writing SimLock Data...  Ok!
    
    SDD Key status : SDData Damaged!!!!! :(
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    
    
    Done!
    
    Connect phone on selected interface...
    
    Phone found!
    Series 60 Device detected!
    read info...  - Ok
    
    Repair SD procedure started...
    
    Phone Imei: 358627048165557
    Key file exists, no need to read...
    Operating mode is OK, no need change...
    Writing Super Dongle Key...   Ok!
    Done!
    
    Local SX4 procedure started...
    
    Check SD : Key is Ok
    Phone Imei: 358627048165557
    Key file exists, no need to read...
    Step 1...
    Step 2...
    SX4 Auth fail...
     - > "Custom Keys" enabled, try again now
     - > If SDD original - "Use Server Sx4"
    
    
    Local SX4 procedure started...
    
    Check SD : Key is Ok
    Phone Imei: 358627048165557
    Use custom key...
    Step 1...
    Step 2...
    Step 3...
    SX4 Auth - Ok
    Upload PM checked
    Uploading RF/Battery tune to phone...
    RM-601.pm not exist
    Select file, please
    Using : RM-718.pm
    Operating mode is OK, no need change...
    
    
    Check ST_SECURITY now...
    Security status : ST_SECURITY => OK
    
    Done!
    
    Elapsed: 00:00:05
    
    Upload done
    
    Reading Phone Info....
    Connected phone -    Nokia C6-01
    Software ver : V 92_11w25.1 01-07-11 RM-601 (c) Nokia
    IMEI    :      358627048165557
    Ape Ver :      022.014
    APE Var :      022.014022.014.04.01022.014.00.01
    APE ADSP:      256
    DSP Ver :      92_11w25
    APE Test:      0.063
    PPM     :      
    CNT     :      
    Product SN   :     0
    Product code :     059C3X9
    Long Prod.SN :     0
    Hardware info=======
    HWID  : 
    Retu  : 40
    Tahvo : 00
    Batery: 4011 mV
    APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
    APE HW: 256
    Lock info ===========
    IMEI       : 358627048165557
    IMEI spNet : 3A 85 26 07 84 61 55 05 
    IMEI svNet : 33 85 26 07 84 61 55 15 F8 
    
    Conf key     : 0000000000000000
    Provider key : 2440700000000000
    Provider    : AT&T;U.S.A. (3650)
    Counters   : Key 0  [3] , Fbus 0  [10]
    Blocks      : 7
    
    LOCK STATUS :
    =============================
    BLK : 1
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 2
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 3
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 4
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 5
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 6
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 7
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    =============================
    LOCKS :  All Open
    =============================
    CRT308 Backup Created
    
    SDD key status : Ok
    SimLock status : Ok
    Security status : Ok
    PA_SL3 phone ,  SP_CODE_LEN : 15
    
    User code : Crypted
    UserDataExLevel : Low [Gallery] , FullFlash method 
    
    Done!
    
    Warranty IMEI restore Ok
    
    Writing product data...
    ProductCode change to 059C3X9 Ok
    Setting Warranty IMEI to 358627048165557 Ok
    Write done
    
    Reading Phone Info....
    Connected phone -    Nokia C6-01
    Software ver : V 92_11w25.1 01-07-11 RM-601 (c) Nokia
    IMEI    :      358627048165557
    Ape Ver :      022.014
    APE Var :      022.014022.014.04.01022.014.00.01
    APE ADSP:      256
    DSP Ver :      92_11w25
    APE Test:      0.063
    PPM     :      
    CNT     :      
    Product SN   :     0
    Product code :     059C3X9
    Long Prod.SN :     0
    Hardware info=======
    HWID  : 
    Retu  : 40
    Tahvo : 00
    Batery: 4004 mV
    APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
    APE HW: 256
    Lock info ===========
    IMEI       : 358627048165557
    IMEI spNet : 3A 85 26 07 84 61 55 05 
    IMEI svNet : 33 85 26 07 84 61 55 15 F8 
    
    Conf key     : 0000000000000000
    Provider key : 2440700000000000
    Provider    : AT&T;U.S.A. (3650)
    Counters   : Key 0  [3] , Fbus 0  [10]
    Blocks      : 7
    
    LOCK STATUS :
    =============================
    BLK : 1
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 2
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 3
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 4
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 5
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 6
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 7
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    =============================
    LOCKS :  All Open
    =============================
    CRT308 Backup Created
    
    SDD key status : Ok
    SimLock status : Ok
    Security status : Ok
    PA_SL3 phone ,  SP_CODE_LEN : 15
    
    User code : Crypted
    UserDataExLevel : Low [Gallery] , FullFlash method 
    
    Done!
    
    Will Write CCC/HWC keys now...
    
    RM-601.rpl not exist
    Select file, please
     - > No any file selected, break operation
    
    Connect phone on selected interface...
    
    Phone found!
    Series 60 Device detected!
    read info...  - Ok
    
    Checking StartUp data ...
    -----------------------
    SDD Key status : SDData is Ok
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    -----------------------
    
    PA_SimLock Version : 
    PA_SL3 phone ,  SP_CODE_LEN : 15
    
    Done!
    
    Reading Phone Info....
    Connected phone -    Nokia C6-01
    Software ver : V 92_11w25.1 01-07-11 RM-601 (c) Nokia
    IMEI    :      358627048165557
    Ape Ver :      022.014
    APE Var :      022.014022.014.04.01022.014.00.01
    APE ADSP:      256
    DSP Ver :      92_11w25
    APE Test:      0.063
    PPM     :      
    CNT     :      
    Product SN   :     0
    Product code :     059C3X9
    Long Prod.SN :     0
    Hardware info=======
    HWID  : 
    Retu  : 40
    Tahvo : 00
    Batery: 4009 mV
    APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
    APE HW: 256
    Lock info ===========
    IMEI       : 358627048165557
    IMEI spNet : 3A 85 26 07 84 61 55 05 
    IMEI svNet : 33 85 26 07 84 61 55 15 F8 
    
    Conf key     : 0000000000000000
    Provider key : 2440700000000000
    Provider    : AT&T;U.S.A. (3650)
    Counters   : Key 0  [3] , Fbus 0  [10]
    Blocks      : 7
    
    LOCK STATUS :
    =============================
    BLK : 1
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 2
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 3
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 4
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 5
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 6
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 7
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    =============================
    LOCKS :  All Open
    =============================
    CRT308 Backup Created
    
    SDD key status : Ok
    SimLock status : Ok
    Security status : Ok
    PA_SL3 phone ,  SP_CODE_LEN : 15
    
    User code : Crypted
    UserDataExLevel : Low [Gallery] , FullFlash method 
    
    Done!
    __________________

    Последний раз редактировалось Gatin; 05.09.2012 в 22:14.
    05.09.2012, 22:09
    Пользователь добавил плюс
    Alva (05.09.2012)
  • Новое
    Аватар для Alva

    Alva
    MCRF Инженер

    Сообщений:
    3,895
    Регистрация:
    30.07.2006
    Возраст:
    44
    Рейтинг мнений: 1330
    Вес репутации: 524
    Alva Alva Alva Alva Alva Alva Alva Alva Alva Alva Alva
    Очки: 102,778, Уровень: 100 Очки: 102,778, Уровень: 100 Очки: 102,778, Уровень: 100
    Активность: 20% Активность: 20% Активность: 20%
    По умолчанию Re: N8, [rm-596] висит на заставке после процедуры erase flash #3
    да, проморгал я эти CMLA, благо ответ содержался здесь
    Пошил 25-ую версию и аппарат завелся.
    Прошу прощения
    05.09.2012, 22:11
    2 пользователя(ей) добавили плюсы
    chabrus (06.09.2012), Jet (05.09.2012)
  • Новое
    Аватар для Jet

    Jet
    MCRF Инженер

    Сообщений:
    1,354
    Регистрация:
    17.04.2007
    Возраст:
    43
    Рейтинг мнений: 1214
    Вес репутации: 672
    Jet Jet Jet Jet Jet Jet Jet Jet Jet Jet Jet
    Очки: 71,436, Уровень: 100 Очки: 71,436, Уровень: 100 Очки: 71,436, Уровень: 100
    Активность: 5% Активность: 5% Активность: 5%
    По умолчанию Re: N8, [rm-596] висит на заставке после процедуры erase flash #4
    не знал об этом, только один раз пришлось подобный понижать. Была X7 которую клиент обновил до 111, переплевался и попросил откатить назад. Я то откатил, а что он теперь не сможет поднять - вот этого не знал. Возьму на заметку.
    __________________
    Пиши на русском, а не русскими буквами, пожалуйста. Это же совсем разные вещи!
    Кроме высшего образования нужно иметь хотя бы среднее соображение и, как минимум, начальное воспитание
    05.09.2012, 22:20
  • Новое
    Аватар для ildar80r

    ildar80r
    MCRF Инженер

    Сообщений:
    472
    Регистрация:
    09.10.2005
    Возраст:
    43
    Рейтинг мнений: 909
    Вес репутации: 421
    ildar80r ildar80r ildar80r ildar80r ildar80r ildar80r ildar80r ildar80r ildar80r ildar80r ildar80r
    Очки: 39,240, Уровень: 100 Очки: 39,240, Уровень: 100 Очки: 39,240, Уровень: 100
    Активность: 99% Активность: 99% Активность: 99%
    По умолчанию Re: N8, [rm-596] висит на заставке после процедуры erase flash #5
    А мне повезло нарваться на 5-6 аппаратов в которых стояла Anna, хотели BiLL, поставил получил зависший на заставке аппарат, стирание и прошивка Anna аппараты заводились и нормально работают. Очевидно ранее аппараты были стёрты.(благо привычка сохранять все бекапы перед прошивкой, да и перед любыми действиями с Nokia)
    __________________
    1. Вы сейчас в интернете
    2. Вы на сайте mcrf.ru
    3. Вы читаете
    5. Вы не заметили что отсутствует пункт 4
    6. Вы сейчас это проверили
    7. Вы улыбаетесь
    8. Улыбайтесь чаще!

    05.09.2012, 23:11
  • Новое
    Аватар для Dr_Wolodya

    Dr_Wolodya
    Сенсей

    Сообщений:
    1,358
    Регистрация:
    25.10.2005
    Возраст:
    45
    Рейтинг мнений: 1171
    Вес репутации: 734
    Dr_Wolodya Dr_Wolodya Dr_Wolodya Dr_Wolodya Dr_Wolodya Dr_Wolodya Dr_Wolodya Dr_Wolodya Dr_Wolodya Dr_Wolodya Dr_Wolodya
    Очки: 90,616, Уровень: 100 Очки: 90,616, Уровень: 100 Очки: 90,616, Уровень: 100
    Активность: 20% Активность: 20% Активность: 20%
    По умолчанию Re: N8, [rm-596] висит на заставке после процедуры erase flash #6
    Цитата:
    Сообщение от ildar80r Посмотреть сообщение
    А мне повезло нарваться на 5-6 аппаратов в которых стояла Anna, хотели BiLL, поставил получил зависший на заставке аппарат, стирание и прошивка Anna аппараты заводились и нормально работают. Очевидно ранее аппараты были стёрты.(благо привычка сохранять все бекапы перед прошивкой, да и перед любыми действиями с Nokia)
    Правильно "Belle", а не "BiLL".
    Начался оффтоп. Тему пока закрою.

    Последний раз редактировалось Dr_Wolodya; 05.09.2012 в 23:19.
    05.09.2012, 23:16
Закрытая тема


Здесь присутствуют: 1 (пользователей: 0 , гостей: 1)
 

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход

Похожие темы
Тема Автор Раздел Ответов Последнее сообщение
К 65-летию победы в ВОВ, история авиации. $tas ** OFFTOPIC ** 0 13.04.2010 10:12
Ситуации с ДАІ, что можно сделать и как вести себя при общении с инспектором. NoName® ** OFFTOPIC ** 12 17.03.2010 14:56
Дневник SYSадмина! alexi ** ЮМОР ** 5 10.05.2007 19:38
E708 Сеть недоступна shpyon Infinity Box 1 02.02.2007 00:59
Cмеемса =)) (рассказы) PGP ** OFFTOPIC ** 40 12.02.2006 21:49


Текущее время: 15:52. Часовой пояс GMT +3.